DeLorme Topo North America 10.0 User Manual page 86

Topo USA User Guide
3. To cancel the resize while dragging, press the ESC key on your keyboard. The size
just prior to this resize is restored.
To Resize the Map Area Using the Resize Tools
The map resize tool runs perpendicular to the tab area. If the secondary and primary maps
are both displaying, the resize tool is the bar that separates them. When the bar is moved
all the way to the left of the map, only the primary map displays. When the bar is moved all
the way to the right of the map, only the secondary map displays.
There are several methods you can use to resize the map area:
• Drag the bar left to expose the area of the primary map you want to see.
Drag the bar right to expose the area of the secondary map you want to see.
•
Click the right arrow on the resize tool once to move the secondary map 1/4 of the
•
screen width. You can repeat this step until the primary map is no longer visible.
Click the left arrow on the resize tool once to move the primary map 1/4 of the
•
screen width. You can repeat this step until the secondary map is no longer visible.
• Double-click the bar above the right arrow to show only the secondary map.
Double-click the bar below the left arrow to show only the primary map.
•
• Double-click the bar between the right and left arrows to display an equal percentage
of both the secondary and primary maps.
To Resize the Tab and Map Area Using the Resize Tools
There are two tab area resize tools. The horizontal resize tool is located above the tab area
and lets you adjust the height of the tab area. The vertical resize tool is located between the
tab area and the overview map lets you resize the width of the tab area.
Using the Horizontal Resize Tool
Drag the horizontal bar up/down to expose the tab area you want to see.
•
Click the up arrow on the horizontal resize tool once to incrementally increase the
•
tab height. You can repeat this step until the top of the tab area is flush with the
bottom of the compass rose in the control panel.
Click the down arrow on the horizontal resize tool once to incrementally decrease the
•
tab height. You can repeat this step until only the tab names display.
72