DeLorme Topo North America 10.0 User Manual page 224

Topo USA User Guide
The Add Stop/Via function adds stops and vias in the order you add them to the route. Use
the following steps to add a stop or via to your route.
1. Create a route.
2. In the New/Edit dialog area in the Route tab, make sure the button next to the
Stop tool (if you are adding a stop) or the Via tool
labeled Add. If it is not, click the arrow next to the button and select Add.
3. To add a stop or via to the route, click the Stop or Via tool and then click the
location on the map.
OR
To use an address book entry as your stop or via location
•
1. Select Stop From Address Book from the Stop drop-down list.
2. Select an Address Book entry, and then click OK.
• To use your current GPS position as your stop or via location
Select Stop at GPS Location from the Stop drop-down list.
OR
Select Via at GPS Location from the Via drop-down list.
Type the stop or via location in the Stop or Via text box
•
Type the name of an address book contact, user-added waypoint, or address.
If you type an address, it must be in one of the following formats: street
address, city, state OR street address, ZIP/Postal Code.
The Book check box (underneath the Address Book buttons in the Find tab)
must be selected to search for address book contact names.
• Right-click the map to add a last stop or via
1. Right-click the map where you want to add the last stop or via.
2. Point to Create Route, and then click Add as Last Stop or Add as
Use the toolbar to add a stop or via.
•
2. If the Auto check box is not selected, click Calculate to recalculate your route to
include the stop or via.
OR
210
OR
Select Via From Address Book from the Via drop-down list.
Last Via.
(if you are adding a via) is