DeLorme Topo North America 10.0 User Manual page 121

Select Road to calculate the distance you will have to travel by road to reach the
•
result.
Select the Repeat search every... check box (required for NavMode) and select
•
how often you want to repeat the search.
Select the Only in Direction of Travel check box so you don't have to back track to
•
make your next stop—if you're driving in a very rural area, you may not want to use
this feature because the closest point of interest may be behind you.
Select the Enable voice reporting check box and then select what you want
•
reported from the Report drop-down list.
Step 3—Start the GPS
1. Connect your GPS device to your portable computer. Ensure the speakers are turned
on and loud enough for you to hear while driving.
2. Launch DeLorme Topo North America.
3. Make sure the NavMode button
4. Click the GPS button
Note If you do not see the GPS button on the toolbar, right-click the toolbar and
select the GPS/NavMode option.
Step 4—Pick what you want to search for
on the toolbar is on (appears indented).
on the toolbar to start your GPS.
Finding a Location on the Map
107