DeLorme Topo North America 10.0 User Manual page 248

Topo USA User Guide
The tab view option allows you to
Advanced tab to control
you can opt to hide them.
You can also use NavMode—a hands free, full-screen view that you can display in 2-D or 3-
D.
To turn NavMode on or off, click the NavMode
appears indented
Notes
The GPS and NavMode toolbar buttons are hidden by default. To show them, right-
•
click the toolbar and click GPS/NavMode.
The button is grayed out
•
back a GPS log
You can also change your GPS view in the Options dialog box:
1. Click the Options button
also click the Options button
2. Clear the Use NavMode check box to turn it off or select the check box to turn it on.
3. Click OK.
NavMode Display
Next Turn—The distance to the next turn, based on the units selected on the
•
Display tab in the Options dialog box.
Dist to Finish—The distance to the finish point on your route, based on the units
•
selected on the Display tab in the Options dialog box.
Speed—Displays the speed you are traveling, based on the units selected on the
•
Display tab in the Options dialog box.
ETA—The estimated time of arrival at the finish of your route. This is based on the
•
time and time zone set on your computer. If your trip goes beyond the current day,
the day of arrival also displays. The ETA does not include any layover time at a stop.
Radar Results—If you are using GPS Radar, an orange bar displays the closest
•
search result. Click Stop Here to insert a stop into your route. Click More Info to
open the GPS Radar subtab on the Find tab and get more information about the
result. Click Stop Radar to stop searching.
234
use the GPS tab to control tracking
navigating. By default, the tabs and Control Panel are visible, but
, NavMode is on.
unless you have a
file.
on the GPS tab.
button on the toolbar. When the button
GPS device plugged
on the toolbar and click the GPS tab. You can
and the Route >
in or are playing