DeLorme Topo North America 10.0 User Manual page 83

Coordinate MapNotes.
•
Grid label display, if Grids are selected in Map Features.
•
Any other place where coordinates display or print.
•
Use the following steps to change how coordinate measurement units display.
1. Click the Options button
OR
Click the arrow next to the Options toolbar button to open the menu. Then, click
Options to open the dialog box.
2. Click the Display tab.
3. Select the coordinate display format from the Coordinates drop-down list.
Degrees
•
Degrees, Minutes
•
Deg, Min, Sec
•
• UTM/UPS (Universal Transverse Mercator/Universal Polar Stereographic)
MGRS (Military Grid Reference System)
•
USNG (United States National Grid)
•
SPCS (State Plane Coordinate System)
•
Note When you select SPCS, an additional drop-down box displays for Zone.
Select the zone from the list.
4. Select the datum from the Datum drop-down list.
• WGS84 (World Geodetic System of 1984)
NAD27 (North American Datum of 1927), which also includes OOH (Old
•
Hawaiian) Datum when in Hawaii
NAD83 (North American Datum of 1983)
•
5. Click OK to commit the change and exit the Options dialog box.
OR
Click Apply to commit the change and keep working in the Options dialog box.
Note The Datum displayed is automatically adjusted when your change your
coordinate preference.
Notes
Customizing the Map and Tab Display
on the toolbar.
69