DeLorme Topo North America 10.0 User Manual page 27

Under Print Layout, select a layout option (Single, 2 x 2, or 3 x 3). The
•
print area displays on both the Map and the Overview Map. In the example
below, 2 x 2 is selected. This means the print area encompasses four
standard pages at whatever paper size you specified in the Setup options. You
can assemble a multi-page map
If you selected 2 x 2 or 3 x 3 and do not want to save all the pages in the
•
multi-page map on the map layout graphic, click each page you do not want
to save. The page appears dimmed or gray. In the example below, page 4 will
not print.
Verify this is the location and photo zoom you want to save. If not, pan the
•
map to the location and zoom to the level you want.
Note Changing the photo zoom enlarges/reduces the map features and
changes the map area that you save as an image. If you increase the photo
zoom level, map text, lines, symbols, etc. are larger and your map area is
reduced. If you decrease the photo zoom level, map text, lines, symbols, etc.
are smaller and your map area is enlarged. The reduction/enlargement
percentages for your photo zoom level display under the Photo Zoom drop-
down list.
• If you want to use other tabs and functions but not lose your current print
area, print photo zoom, or other settings, select the Lock Print Center check
box. This locks the print area and changes the tab label to red.
Add text or graphics to your
•
into a large map.
map.
Getting Started
13