DeLorme Topo North America 10.0 User Manual page 222

Topo USA User Guide
Step 1—Set the route start
Click the Route tab and type the start location for your route in the Start text box.
Step 2—Add a stop
Assign your first stop by typing it in the Stop text box. Since you are adding your stops in
the order you want to reach them along your route, make sure the Add option is selected
and then click Add to assign the stop.
Note The Stop text box clears itself after you click the Add button. This allows you to use
the text box to add more stops.
Step 3—Add a second stop
Assign your second stop using the same procedure outlined in step 2.
Step 4—Set the route finish
Since you want to finish your route where you started, use the same finish location that you
used for your start point in step 1.
Step 5—Select your activity type
To ensure the route is calculated for your activity, select the Walking/Jogging button and
then select Trail as the route calculation method.
Step 6—Calculate the route
Click Calculate to calculate the trail. The route displays on the map.
208