DeLorme Topo North America 10.0 User Manual page 190

Topo USA User Guide
The large red circle indicates a break in the user trail. The small red circle indicates a break
between the user trail and the existing trail.
To ensure that the trail is routable, you must join the trail lines and then snap them to
existing trails/roads.
1. Click Done to return to the main Draw tab area.
2. Click the Select tool
and then click both of the trail segments. Boxes display around each segment.
3. Right-click one of the segments, point to Manage Draw, and then click Join Lines.
Step 4—Snap the new trail to an existing trail
To snap the new trail to an existing road/trail:
1. Click the Select tool and then click the trail on the map.
2. Click the pink end point of your trail that is closest to the existing road/trail (it will
display as a red circle) and drag it to the existing road/trail. A yellow diamond
defines the snap point.
176
in the Draw tab, press the SHIFT key on your keyboard,