DeLorme Topo North America 10.0 User Manual page 152

Topo USA User Guide
Note Place the removable tape on the corners and edges, not along the seams.
7. For each seam, fix the tape to the work surface, not on the sheet, so the tape is in
alignment with the seam.
8. Spool off enough permanent tape to cover the entire seam. Be careful not to let the
tape touch the map until you are ready to apply it (in step 9).
9. Keeping the length of the tape taut, carefully apply the tape to the seam until both
sides are fixed to the work surface.
10. Press the tape along the seam to remove any air gaps.
11. Repeat steps 6 through 10 until all seams are completely pieced together.
138