Topo USA User Guide
Step 4—Make changes
To include or exclude a specific file, layer, or map, select or clear its check box.
•
•
To change the location for the file after sync, click the toggle
Destination column. The selected location is blue.
•
The toggle on the project side indicates where you are sending the file to—
select GPS for the device's internal drive. Select SD for an SD card in the
device.
The toggle on the GPS side allows you to move a file, layer, or map. For
•
example, if you have a waypoint file on your devices' internal drive, you
might want to move it to the SD card.
•
If an option is grayed out, it is unavailable for that data.
280
in the Select