Download Print this page

KitchenAid KSRF36DT Installation Instructions Manual page 9

36" built-in refrigerator
Hide thumbs

Advertisement

Now start...
El
Remove top grille assembly
.
package, literature package
and parts bag taped to the
refrigerator door and save.
El
Remove the four brackets
(2 on each side) that attach
'
shipping base
to the bottom of the refrigerator.
Discard brackets and shipping
base. Do Not remove tape and door
bracing at this time.
Place appliance dolly under
the side of the refrigerator.
Wrap strap from truck
loosely around refrigerator.
Insert
two corner posts around handles to
prevent scratching.
Tighten strap
making sure that handles will be
protected.
Personal Injury Hazard
l
Because of the weight and
size of the built-in
refrigerator, two or more
people are needed to move
and safely install it.
l
Most of the refrigerator's
weight is at the top. Extra
care is needed when
moving the refrigerator to
prevent tipping.
Failure to do so could
result in personal injury.
Floor Damage
Keep cardboard shipping piece
or plywood under refrigerator
until it is installed in operating
position.
Failure to do so may cause
damage to floor covering.
14
n
Move refrigerator to
kitchen.
Place cardboard
or
plywood under
refrigerator.
Remove appliance
dolly. Open doors and remove all
boxes, parts packages and packing
materials from inside refrigerator
and freezer compartments.
Set
aside until needed during
installation.
Do Not remove any protective
film until refrigerator is
completely installed.
5.
Numbers
correspond
to steps
8.
13.
14.
15.
8.
Page 8

Advertisement

loading

  Related Manuals for KitchenAid KSRF36DT