Regency Alterra CI1200 Owners & Installation Manual page 27

Completely clean out entire unit
Inspect air tubes, baffl es and bricks
Adjust door catch / latch
Paper Test
Inspect condition and seal of:
Glass Gasket
Door Gasket
Check and lubricate door hinge + latch
Check glass for cracks
Clean blower motor
Inspect and clean chimney
Regency CI1200 / CI1250 Wood Cast Insert
Annual Maintenance
Annually
Replace any damaged parts.
If unable to obtain a tight seal on the door - replace door gasket seal.
Readjust latch after new gasket installed.
Test the seal on the loading door with a paper bill.
Place a paper bill in the gasketed area of the door on a cold stove–close the
door.
Try to remove the paper by pulling.
The paper should not pull out easily, if it does, try adjusting the door latch, if
that doesn't solve the problem replace the door gasket.
Perform paper test - replace gasket if required
Use only high temperature anti seize lube. (ie. never seize)
Replace if required.
Disconnect power supply.
Remove and clean blower.
*DO NOT LUBRICATE*
Annual professional chimney cleaning recommended.
MAINTENANCE
27