Ip Filter / Mac Filter Conflict; Modifying Filters; Deleting Filters; Login String - ATEN CS1708i User Manual

2. Specify the MAC address in the dialog box (for example, 001074670000),
then click OK.
Repeat these steps for any additional MAC addresses you want to filter.

IP Filter / MAC Filter Conflict

If there is a conflict between an IP filter and a MAC filter – for example, where
a computer's IP address is allowed by the IP filter but it's MAC address is
excluded by the MAC filter – then that computer's access is blocked.
In other words, if either filter blocks a computer, then the computer is blocked,
no matter what the other filter is set to.

Modifying Filters

To modify a filter, select it in the IP Filter or MAC Filter list box and click
Modify. The Modify dialog box is similar to the Add dialog box. When it
comes up, simply delete the old address(es) and replace it with the new one(s).

Deleting Filters

To delete a filter, select it in the IP Filter or MAC Filter list box and click
Delete.

Login String

The Login String lets the Administrator specify a login string that users must
include (in addition to the IP address) when they access the CS1708i / CS1716i
with a browser. For example:
192.168.0.126/CS1716i
Note: 1. There must be a forward slash between the IP address and the string.
2. If no login string is specified here, anyone will be able to access the
CS1708i / CS1716i login page using the IP address alone. This makes
your installation less secure.
For security purposes, we recommend that you change this string occasionally.
6. Administration
61