Browser; Ap Windows Client - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual
4. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit.

Browser

1. Set your computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the CS1708i / CS1716i.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the CS1708i / CS1716i that is suitable for the
network segment that it resides on.
4. After you log out, reset your computer's IP address to its original value.

AP Windows Client

For computers running Windows, the CS1708i / CS1716i's IP address can be
determined with the Windows AP program (see The Windows Client,
page 121). When you run the program it searches the network segment for
CS1708i / CS1716i devices, and displays the results in a dialog box similar to
the one below:
You can now use this network address, or you can change it by clicking Login,
logging in, clicking Admin Utility, and clicking the Network tab.
146