Ip Address Determination; Ip Installer - ATEN CS1708i User Manual

IP Address Determination

If you are an administrator logging in over the Net for the first time, you need
to access the CS1708i / CS1716i in order to give it an IP address that users can
connect to. There are three methods to choose from. In each case, your
computer must be on the same network segment as the CS1708i / CS1716i.
After you have connected and logged in you can give the CS1708i / CS1716i
its fixed network address. (See Network, page 55.)

IP Installer

For computers running Windows, an IP address can be assigned with the IP
Installer utility:
1. Unzip the contents of IPInstaller.zip (found on the Software CD that came
with your CS1708i / CS1716i package) to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
3. Select the CS1708i / CS1716i in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The CS1708i / CS1716i's MAC address
is located on its bottom panel.
Appendix
145