Hotkey Setup - ATEN CS1708i User Manual

Hotkey Setup

Various configuration actions related to the keyboard, video, and
mouse can be performed via hotkey combinations. The actions
performed by the Hotkeys are listed at the left of the panel; the hotkeys that
invoke them are shown to the right.
An explanation of the Hotkey actions is given in the table below:
Action
Toggle screen mode
Adjust Video
Toggle OSD
Toggle pointer display
Adjust mouse
Toggles the screen display between full screen and
windowed modes.
Brings up the Video Settings dialog box (see Video Settings,
page 81).
Toggles the Control Panel Off and On.
If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this
function to hide the non-functioning pointer. Since this
function is a toggle - use the hotkeys again to bring the
pointer display back to its original configuration.
This utility synchronizes the local and remote mouse
pointers. After invoking this utility, simply click the local
mouse pointer on top of the remote mouse pointer.
Note: If you still have synchronization problems following this
procedure, see Mouse Sync Mode, page 70, and Additional
Mouse Synchronization Procedures, page 149 for further
steps you can take to resolve the problem.
7. The Windows Client Viewer
Explanation
79