Firmware Upgrade Recovery - ATEN CS1708i User Manual
Kvm on the net
Hide thumbs
Also See for CS1708i:
- User manual (216 pages) ,
- Specifications (5 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
CS1708i / CS1716i User Manual
Firmware Upgrade Recovery
There are three conditions that call for firmware upgrade recovery:
When a firmware upgrade is manually aborted.
When the mainboard firmware upgrade fails.
When the I/O firmware upgrade fails.
To perform a firmware upgrade recovery, do the following:
1. Power off the switch. If it is part of a daisy chain, disconnect it from the chain.
2. Connect the Firmware Upgrade Cable to its Firmware Upgrade Port.
3. Slide the Firmware Upgrade Recovery Switch to the Recover position.
4. Power the switch back on and repeat the upgrade procedure.
5. After the switch has been successfully upgraded, power it off, and slide the
Firmware Upgrade Recovery Switch back to the Normal position.
6. If the switch is part of a daisy chain, replace it in the chain.
7. Power the switch back on.
134
Advertisement
Table of Contents
