Beeper Setup; Key Click - Intermec 6400 User Manual

Terminal Emulation Menu Screens

Beeper Setup

The Beeper Setup menus allow you to adjust the beeper
tones for key clicks (presses) and error conditions.

Key Click

Use the Key Click option to adjust the frequency and length
(duration) of the sound made when you press a key.
The frequency of the tone is adjustable in steps from 0 to
32. The length is adjustable in steps from 0 to 10. The Key
Click menu screen and subscreens are shown below.
Use Cursor Up
And Down Keys
To Adjust
Key Click>
3-46 6400 Hand-Held Computer User's Guide
Beeper Setup
1) Key Click
2) Error Tone
3) Beeper select
Key Click
1)
2) Length
3) Frequency
Length
2
xx
SECTION 3
Frequency
Use Cursor Up
And Down Keys
3
To Adjust
Key Click> xx