Battery Charger Led And Error Codes; Charging Indicator Error Codes - Intermec 6400 User Manual

Operation

Battery Charger LED and Error Codes

When your battery pack is placed in a multipack or single
pack charger, the charger 's LED indicates the battery pack
charging status:
"
"
"

Charging Indicator Error Codes

First Second Third
Blink Blink Blink
Orange Orange Orange Off
Red Orange Red
Orange Red Red
Red Red Red
Red Red Orange Off
Red Orange Orange Off
Orange Red Orange Off
2-10 6400 Hand-Held Computer User's Guide
Red indicates that the battery is charging.
Green indicates the battery pack is fully charged.
A combination of a blinking red and orange LED can
indicate one of two basic conditions: Either a bad con-
nection, in which case you need to remove and reinsert
the battery pack into the charger, or there is a faulty
battery that needs to be replaced. However, the indica-
tor can also alert you of a more serious charging or
product error. Table 2-1 and Table 2-2 on page 2-10
show you this more extensive list of error codes and
the solution notes.
Table 2-1
Charging Indicator Error Codes
Pause Description
High Voltage Fault
Off No Communication
Off Checksum Error
Off Upper Cell Mismatch
Lower Cell Mismatch
5 Bad Packets Re-
ceived
Wrong Battery Type
SECTION 2
Solution Notes
1 and 2
1
1
1 and 3
1 and 3
1
1