Touch Screen; Specification; Driver Installation- Windows Xp - Acnodes FPC 5084 User Manual

4.2

Touch Screen

The FPC 5084 uses the 5-wire analog resistve. There are the
specification and driver installation which are listed below.

4.2.1 Specification

Touch Screen
Touch Screen Controller
Communications
Baud Rate
Resolution
Power Input
Power Consumption

4.2.2 Driver Installation- Windows XP

The FPC 5084 provides a touch screen driver that users can install it
under the operating system Windows XP. To facilitate installation of
the touch screen driver, you should read the instructions in this chapter
carefully before you attempt installation.
1. Insert Driver CD and follow the path to select the
"\Drivers\XP\Step 5 - Touch".
2. Follow the installing procedure and press OK.
Installation of Drivers
FPC 5084 User Manual
5-wire Analog Resistive type
PenMount 6000 USB
Touch Screen Controller IC
USB interface
19200 baud rate fixed
1024 x 1024 (10 bit A/D converter inside)
5V
Active: 24.6mA / Idle Mode: 13.4mA
59