Acnodes FPC 5084 User Manual page 45

expired. The default setting is Suspend.
Disabled
Suspend
Hard Disk Drive Power Down Mode
This option specifies the power conserving state that the
hard disk drive enters after the specified period of hard drive
inactivity has expired. The default setting is Suspend.
Disabled
Suspend
Suspend Time Out (Minute)
This option specifies the length of time the system waits
before it enters suspend mode. The default setting is
Disabled.
This setting prevents the system from entering
Disabled
suspend mode. This is the default setting.
Set this item to allow the computer system to enter
1 Min
suspend mode after being inactive for 1 minute.
Set this item to allow the computer system to enter
4 Min
suspend mode after being inactive for 4 minutes.
Set this item to allow the computer system to enter
10 Min
suspend mode after being inactive for 10 minutes.
Throttle Slow Clock Ratio
Use this item to specify the speed of the system clock when
running the power saving states.
Power Button Mode
This option specifies how the externally mounted power
AMI BIOS Setup Utility
FPC 5084 User Manual
This setting prevents the BIOS from initiating
any power saving modes concerned with the
video display or monitor.
This option places the monitor into suspend
mode after the specified period of display
inactivity has expired. This means the monitor is
not off. The screen will appear blacked out. The
standards do not cite specific power ratings
because they vary from monitor to monitor, but
this setting use less power than Standby mode.
This is the default setting.
This setting prevents hard disk drive power
down mode.
This option cuts the power to the hard disk
drives during a system suspend. This is the
default setting.
35