Related Manuals for Acnodes FPC 5084
Summary of Contents for Acnodes FPC 5084
- Page 1 FPC 5084 All-in-One 8.4” SVGA TFT Fanless Touch Panel ® Computer with Intel Atom N270 Processor Onboard User’s Manual...
-
Page 2: Disclaimers
ACNODES does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. ACNODES does not make any commitment to update the information in this manual. -
Page 3: Safety Approvals
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Safety Precautions
Turn OFF the system power before cleaning. Clean the system using a cloth only. Do not spray any liquid cleaner directly onto the screen. The FPC 5084 may come with or w/o a touch screen. Although the touch screen is chemical resistant, it is recommended that you spray the liquid cleaner on a cloth first before wiping the screen. - Page 5 When handling boards and components, wear a wrist- grounding strap, available from most electronic component stores. Trademarks Acknowledgments ACNODES is a trademark of ACNODES Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. ® ™...
-
Page 6: Table Of Contents
Table of Contents Disclaimers ................ii Safety Approvals..............iii Safety Precautions..............iv CHAPTER 1 INTRODUCTION ........1 General Description ..........1 Specifications............2 1.2.1 Main CPU Board ............2 1.2.2 I/O System ..............3 1.2.3 System Specification ..........3 Dimensions ............5 I/O Outlets............ - Page 7 CHAPTER 4 DRIVERS INSTALLATION...... 58 System .............. 58 Touch Screen ........... 59 4.2.1 Specification.............. 59 4.2.2 Driver Installation- Windows XP ....... 59 Embedded O.S..........62 4.3.1 Windows XP Embedded ........... 62 4.3.2 Windows CE.NET 6.0 ..........63...
- Page 8 MEMO viii...
-
Page 9: Chapter 1 Introduction
General Description Specification Dimensions I/O Outlets Package List General Description The FPC 5084 is a fan-less and compact-size touch panel computer, equipped with a 8.4” TFT LCD display and low power consumption Intel ○ Atom N270 1.6GHz processor with FSB ®... -
Page 10: Specifications
™ 830 supports CompactFlash card. Industrial-grade Product Design The FPC 5084 has an incredible design to be used in different industrial environments. The front bezel meets the IP65/NEMA4 standard. For connecting other devices, the FPC 5084 also features several interfaces: USB, Ethernet, and RS-232/422/485. -
Page 11: I/O System
FPC 5084 User Manual 1.2.2 I/O System Standard I/O One RS-232 and one RS-232/422/485 Two USB 2.0 Ethernet One RTL81111b Gigabit Ethernet Audio One Line-out Expansion One Mini card Storage One socket for CF card Box-header Two 2×5 box header for COM3, COM4 1.2.3 System Specification... - Page 12 FPC 5084 NOTE All specifications and images are subject to change without notice. NOTE If it is operated in high temperature environment, the wide temperature DRAM is reommended. Introduction...
-
Page 13: Dimensions
FPC 5084 User Manual Dimensions This diagram shows you dimensions and outlines of the FPC 5084 830. Introduction... - Page 14 FPC 5084 Introduction...
-
Page 15: I/O Outlets
FPC 5084 User Manual I/O Outlets Please refer to the following illustration for I/O locations of the FPC-5084. Function POWER SWITCH (ATX) 10-30VDC POWER Input COM 1 (RS-232/422/485) COM 2 (RS-232) ETHERNET (RJ-45) USB 2.0 X 2 AUDIO (LINE-OUT) Introduction... -
Page 16: Packing List
FPC 5084 Packing List When you receive the FPC 5084, the bundled package should contain the following items: FPC 5084 x 1 Panel Mount Kit x 6 Driver CD x1 Wall-Mount Kit x1 Desktop Stand Kit (optional) VESA ARM (optional) -
Page 17: Chapter 2 Hardware Installation
FPC 5084 User Manual CHAPTER 2 HARDWARE INSTALLATION The FPC 5084 provides rich I/O ports and flexible expansions for you to meet different demand, for example, CF card. The chapter will show you how to install the hardware. It includes: ™... - Page 18 FPC 5084 Step 2 Find out the cover on the side of the system. Step 3 Locate the CompactFlash socket, and insert the card into the socket. Hardware Installation...
-
Page 19: Serial Ports Interface
FPC 5084 User Manual Serial Ports Interface The FPC 5084 has two onboard serial ports, COM1 (RS-232/ 422/ 485) and COM2 (RS-232). The following table shows you the pin assignments of this connector: Signal Signal Data Carrier Detect (DCD) Data Set Ready (DSR) - Page 20 FPC 5084 When COM1 is set to RS-422 or RS-485, the pin assignments are listed below: Signal Name Pin # RS-422 RS-485 DATA- DATA+ No connector No connector No connector No connector No connector No connector No connector No connector...
-
Page 21: Ethernet
FPC 5084 User Manual Ethernet The FPC 5084 is equipped with a high performance Plug and Play Ethernet interface, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector. Please refer to detailed pin assignment list below:... -
Page 22: Mountings - Panel/Wall/Desktop/Vesa
There are several mounting ways for the FPC 5084, Panel, Wall, Desktop and VESA mountings. 2.4.1 Panel Mounting The FPC 5084 is designed for panel mount application. A set of standard mounting kit are bundled with the system package that you can use it to mount the FPC 5084. -
Page 23: Wall-Mounting
FPC 5084 User Manual 2.4.2 Wall-Mounting The FPC 5084 is designed for Wall mounting application. Please refer to the following steps: Find out the screws as marked on the back side of chassis. Hardware Installation... -
Page 24: Desktop-Mounting
FPC 5084 2.4.3 Desktop-Mounting The FPC 5084 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out the screws as marked on the back side of chassis. Hardware Installation... - Page 25 FPC 5084 User Manual Step 2 Assemble the desktop stand to the chassis, and fix the screws. Hardware Installation...
-
Page 26: Vesa-Arm Mounting
FPC 5084 2.4.4 VESA-ARM Mounting Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the VESA-ARM to the back side of the chassis, and fix the screws. Hardware Installation... - Page 27 FPC 5084 User Manual Step 3 VESA mounting Installation completed. Hardware Installation...
- Page 28 FPC 5084 Hardware Installation...
-
Page 29: Dram Installation
FPC 5084 User Manual DRAM Installation The FPC 5084 provides one 200-pin DDR2 SO-DIMM socket that support system memory up to 2GB. Please follow steps below to install the memory modules: 1. Unscrew six screws to remove the rear chassis. - Page 30 FPC 5084 3. Push down latches on each side of the SO-DIMM socket. Install the memory module into the socket and push it firmly down until it is fully seated. The socket latches are levered upwards and clipped on to the edges of the SO-DIMM socket.
-
Page 31: Wireless Lan Card Installation
FPC 5084 User Manual Wireless LAN Card Installation The FPC 5084 provides one Mini card socket for user to install one wireless LAN card. When installing the wireless LAN card, refer to the following instructions and illustration: 1. Open the back cover and find mainboard (SBC87830). - Page 32 FPC 5084 3. Find the built-in Antenna cable which is tied with other cables on the top of the device. Connect antenna cable to MAIN connector on wireless LAN card. 4. There are two connectors on wireless LAN card. One is MAIN, and the other is auxiliary.
- Page 33 FPC 5084 User Manual MEMO Hardware Installation...
-
Page 35: Chapter 3 Ami Bios Setup Utility
FPC 5084 User Manual CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMI BIOS setup utility. Starting To enter the setup screens, follow the steps below: Turn on the computer and press the <Del>... -
Page 36: Main Menu
FPC 5084 The <F10> key allows you to save any changes you have made and exit Setup. Press the <F10> key to save your changes. The <Esc> key allows you to discard any changes you have made and exit the Setup. Press the <Esc>... -
Page 37: Advanced Menu
FPC 5084 User Manual System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format. - Page 38 FPC 5084 Configure advanced CPU settings This screen shows the CPU Configuration, and you can change the value of the selected option. Max CPUID Value Limit You can enable this item to let legacy operating systems boot even without support for CPUs with extended CPU ID functions.
- Page 39 FPC 5084 User Manual Enhanced C-States This item allows you to enable or disable any available enhanced C-states ( C1E, C2E, C3E, C4E and Hard C4E). IDE Configuration You can use this screen to select options for the IDE Configuration, and change the value of the selected option.
- Page 40 FPC 5084 Serial Port1 Address This item specifies the base I/O port address and Interrupt Request address of serial port 1. The Optimal setting is 3F8/IRQ4. The Fail-Safe default setting is 3F8. Serial Port1 IRQ This item specifies the IRQ used by the serial port 1.
- Page 41 FPC 5084 User Manual Serial Port4 Address This item specifies the base I/O port address and Interrupt Request address of serial port 4. Serial Port4 IRQ This item specifies the IRQ used by the serial port 4. AMI BIOS Setup Utility...
- Page 42 FPC 5084 Hardware Health Configuration This screen shows the Hardware Health Configuration, and a description of the selected item appears on the right side of the screen. System Temperature/CPU Temperature These items display the temperature of CPU and System, Vcore, etc.
- Page 43 FPC 5084 User Manual ACPI Settings You can use this screen to select options for the ACPI Settings, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
- Page 44 FPC 5084 APM Configuration You can use this screen to select options for the APM Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. Power Management/APM Set this item to allow Power Management/APM support.
- Page 45 FPC 5084 User Manual expired. The default setting is Suspend. This setting prevents the BIOS from initiating Disabled any power saving modes concerned with the video display or monitor. This option places the monitor into suspend mode after the specified period of display inactivity has expired.
- Page 46 FPC 5084 button on the front of the computer chassis is used. The default setting is On/Off. Pushing the power button turns the computer On/Off on or off. This is the default setting. This is the default setting. Pushing the power button places the computer Suspend in Suspend mode or Full On power mode.
- Page 47 FPC 5084 User Manual MPS Configuration This screen shows the MPS (Multi Processor Specification) Configuration, and you can change its value. A description of the selected item appears on the right side of the screen. MPS Revision Use this item to select MPS (Multi Processor Specification) Revision 1.1 or 1.4.
- Page 48 FPC 5084 PCI Express Configuration This screen shows the PCI Express Configuration, and you can change its value. A description of the selected item appears on the right side of the screen. Active State Power-Management Use this item to enable or disable the function of Active State Power-Management to provide you with lower power consumption.
- Page 49 FPC 5084 User Manual SB PCIE Ports Configuration Scroll to this item and press <Enter> to view the SB PCIE Ports Configuration sub menu, which contains several options for your configuration. AMI BIOS Setup Utility...
- Page 50 FPC 5084 USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. Legacy USB Support Use this item to enable or disable support for USB device on legacy operating system.
-
Page 51: Pci Pnp Menu
FPC 5084 User Manual PCI PnP Menu The PCI PnP menu allows users to change the advanced settings for PCI/PnP devices. AMI BIOS Setup Utility... - Page 52 FPC 5084 Clear NVRAM Use this item to clear the data in the NVRAM (CMOS). Here are the options for your selection, No and Yes. Plug & Play O/S When the setting is No, Use this item to configure all the devices in the system.
- Page 53 FPC 5084 User Manual and Yes. Palette Snooping Some old graphic controllers need to “snoop” on the VGA palette, and then map it to their display as a way to provide boot information and VGA compatibility. This item allows such snooping to take place. Here are the options for your selection, Disabled and Enabled.
-
Page 54: Boot Menu
FPC 5084 Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Boot Settings Configuration Boot Device Priority... - Page 55 FPC 5084 User Manual Boot Settings Configuration Quick Boot Enabling this item lets the BIOS skip some power on self tests (POST). The default setting is Enabled. Quiet Boot Set this item to allow the computer system Disabled to display the POST messages.
- Page 56 FPC 5084 IRQ. Here are the options for your selection, Auto, Enabled and Disabled. Wait For ‘F1’ If Error If this item is enabled, the system waits for the F1 key to be pressed when error occurs. The default setting is Enabled.
- Page 57 FPC 5084 User Manual Removable Drives Use this screen to view the removable drives in the system. The BIOS will attempt to arrange the removable drive boot sequence automatically. You can also change the booting sequence. AMI BIOS Setup Utility...
- Page 58 FPC 5084 Lan Boot Settings Configuration The Lan Boot Settings Configuration can enable or disable Lan Boot ROM to allow the system boot on LAN. AMI BIOS Setup Utility...
-
Page 59: Security Menu
FPC 5084 User Manual Security Menu The Security menu allows users to change the security settings for the system. Supervisor Password This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. - Page 60 FPC 5084 menu. You can use the sub menu to change the user password. Boot Sector Virus Protection This option is near the bottom of the Security Setup screen. The default setting is Disabled. Set this item to prevent the Boot Sector Virus Disabled Protection.
-
Page 61: Chipset Menu
FPC 5084 User Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: North Bridge Configuration South Bridge Configuration For items marked with “f”, please press <Enter>... - Page 62 FPC 5084 North Bridge Configuration DRAM Frequency This item allows you to control the Memory Clock. Configure DRAM Timing by SPD This item can enable or disable DRAM timing by SPD (Serial Presence Detect) device, which is a small EEPROM chip on...
- Page 63 FPC 5084 User Manual AMI BIOS Setup Utility...
- Page 64 FPC 5084 South Bridge Configuration AMI BIOS Setup Utility...
- Page 65 FPC 5084 User Manual USB Function This item allows you to enable or disable USB function. USB 2.0 Controller This item allows you to enable or disable the USB 2.0 controller. Audio Controller This item allows you to enable or disable the audio support.
-
Page 66: Exit Menu
FPC 5084 This item allows you to set or disable the PCI Express Ports. Exit Menu The Exit menu allows users to load your system configuration with optimal or failsafe default values. Save Changes and Exit When you have completed the system configuration... - Page 67 FPC 5084 User Manual Use this item to abandon all changes. Load Optimal Defaults It automatically sets all Setup options to a complete set of default settings when you select this option. The Optimal settings are designed for maximum system performance, but may not work best for all computer applications.
-
Page 68: Chapter 4 Drivers Installation
FPC 5084 CHAPTER 4 DRIVERS INSTALLATION System FPC 5084 supports Windows 2000/XP. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. Insert Driver CD and select the “\Drivers\XP”. Select all files and follow the installing procedure. -
Page 69: Touch Screen
Active: 24.6mA / Idle Mode: 13.4mA 4.2.2 Driver Installation- Windows XP The FPC 5084 provides a touch screen driver that users can install it under the operating system Windows XP. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation. - Page 70 FPC 5084 Click Start menu and select “PenMount Utilities”; and then, a “PenMount Control Panel” pops out. Installation of Drivers...
- Page 71 FPC 5084 User Manual Select the “Standard Calibrate” tab. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. Installation of Drivers...
-
Page 72: Embedded O.s
FPC 5084 Embedded O.S. The GOT-5840T provides the W indows XP Embedded and Windows CE.Net 6.0. The O.S. is supported devices which are listed below. 4.3.1 Windows XP Embedded Here are supported onboard devices: Onboard Multi I/O PS2 Keyboard and mouse... -
Page 73: Windows Ce.net 6.0
FPC 5084 User Manual 4.3.2 Windows CE.NET 6.0 Here are supported onboard devices: Onboard Multi I/O PS2 Keyboard and mouse CRT/LCD display 10/100/1000 base-T Ethernet Compact Flash Onboard Audio Audio Touch Screen Calibration Touch screen In this image we add PenMount Touch drivers and utilities. It is customized for 800 x 600.