Acnodes FPC 5084 User Manual page 55

Boot Settings Configuration
Quick Boot
Enabling this item lets the BIOS skip some power on self
tests (POST). The default setting is Enabled.
Quiet Boot
Set this item to allow the computer system
Disabled
to display the POST messages.
Set this item to allow the computer system
to display the OEM logo. This is the
Enabled
default setting.
AddOn ROM Display Mode
This item selects the display mode for option ROM. The
default setting is Force BIOS.
Boot Num-Lock
Use this item to select the power-on state for the NumLock.
The default setting is On.
PS/2 Mouse Support
This item determines if the BIOS should reserve IRQ12 for
the PS/2 mouse or allow other devices to make use of this
AMI BIOS Setup Utility
FPC 5084 User Manual
45