1. Manuals
  2. Brands
  3. Acnodes Manuals
  4. Touch Panel
  5. FPC 875X
  6. User manual

Acnodes FPC 875X User Manual

Fanless panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
FPC875X: 10.1/15.6/18.5" Fanless Touch Panel PC with
Atom D2550 1.86GHz Processor
14628 Central Ave,
Chino, CA 91710
tel:909.597.7588, fax:909.597.1939
FPC 875X
Fanless Panel PC
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes' web site at www.acnodes.com.

Advertisement

Table of Contents
loading

Related Manuals for Acnodes FPC 875X

Summary of Contents for Acnodes FPC 875X

  • Page 1 Atom D2550 1.86GHz Processor © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, 14628 Central Ave, please visit Acnodes’ web site at www.acnodes.com. Chino, CA 91710 tel:909.597.7588, fax:909.597.1939...
  • Page 2 Copyright 2013 All Rights Reserved The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3 CE MARK This device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
  • Page 4 LEGISLATION AND WEEE SYMBOL 2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dust bin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life.

  • Page 5: Table Of Contents

    Table of Contents 1. Packing List......1 1-1. Standard Items ............1 1-2. Optional Items ............2 2. System View ......3 2-1. Front & Side View ............ 3 2-2. Rear View ..............3 2-3. I/O view..............4 2-4. Dimensions............. 5 2-4-1.
  • Page 6 5. Specification ......15 6. Jumper Setting......20 6-1. C48 Motherboard............ 20 6-1-1. Motherboard Layout ..........20 6-1-2. Connectors & Functions ........... 22 6-1-3. Jumper Setting ………………........23 6-2. C56 Motherboard............ 29 6-2-1. Motherboard Layout ..........29 6-2-2. Connectors & Functions .......... 30 6-2-3.

  • Page 7: Packing List

    Packing List 1-1. Standard Items a. System b. Power adapter c. Driver bank d. Power cord e. User manual RJ45-DB9 cable (x2) g. Allen wrench Note: Power cord will be supplied differently according to various region or country.

  • Page 8: Optional Items

    1-2. Optional Items...

  • Page 9: System View

    System View 2-1. Front & Side View 1. Touch screen 3. Ventilation 2. Built-in web cam 4. MSR cable hole 2-2. Rear View FPC8755/8758 FPC8752 5. VESA mounting holes 6. Cable cover 7. Safety label...

  • Page 10: I/O View

    2-3. I/O view C48 Motherboard b c d e Item No. Description DC IN Cash drawer MIC IN Line out COM port 1, 2, 3, 4 (from left to right) USB(x4) Printer Power button HDD 5V SATA (e-SATA) HDD slot C56 Motherboard Item No.

  • Page 11: Dimensions

    2-4. Dimensions 2-4-1. 10.1" System 263mm 38mm...

  • Page 12: 21.5" System

    2-4-3. 18.5" System 464mm 48mm 2-4-4. 21.5" System...

  • Page 13: System Assembly

    System Assembly 3-1. Open the Chassis Cover The motherboard and RAM module can be replaced by opening the chassis cover, which is located on the back side of the system. Please follow the steps below to open the chassis cover. 1.

  • Page 14: Ram Module Replacement

    3-2. RAM Module Replacement To remove and replace the RAM module, please open the chassis cover firstly as steps dscribed in chapter 3-1. Removing a RAM module 1. Find the memory slot at the right side of the motherboard. C48 Motherboard C56 Motherboard 2.

  • Page 15: Hdd Replacement

    Installing a RAM moudle 3. Slide the memory module into the memory slot and press down until the ejector clips snaps in place. 3-3. HDD Replacement To remove and replace the HDD, please open the cable cover firstly as stpes dscribed in chapter 3-1-1.
  • Page 16 3. Attach the HDD to the HDD tray and slide it into the slot until it snaps in place. Please note the top of the HDD should be on the upper side. FPC8752 1. Loosen the screws(x2) to remove the HDD bracket from the system. 2.

  • Page 17: Peripheral Installation

    Peripheral Installation 4-1. MSR Installation To install MSR, please open the cable cover firstly as steps described in chapter 3-1-1. 1. Insert MSR module in place and fasten the screws (x2) on the back to secure the module. 2. Connect MSR cable to the connector on system side.

  • Page 18: Stand Installation

    4-2. Stand Installation 1. Place the system face down. Make sure not to scrath the screen. 2. Attach the stand to the back of the system. 3. Fasten the screws(x4) to secure the stand.

  • Page 19: Cash Drawer Installation

    4-3. Cash Drawer Installation You can install a cash drawer through the cash drawer port. Please verify the pin assignment before installation. Cash Drawer Pin Assignment Signal DOUT bit0 DIN bit0 12V / 19V DOUT bit1 Cash Drawer Controller Register The Cash Drawer Controller use one I/O addresses to control the Cash Drawer.
  • Page 20 Bit 7: Reserved Bit 6: Cash Drawer “DIN bit0” pin input status. = 1: the Cash Drawer closed or no Cash Drawer = 0: the Cash Drawer opened Bit 5: Reserved Bit 4: Reserved Bit 3: Cash Drawer “DOUT bit1” pin output control. = 1: Opening the Cash Drawer = 0: Allow close the Cash Drawer Bit 2: Cash Drawer “DOUT bit0”...

  • Page 21: Specification

    Specification Model Name FPC8755 FPC8758 Mainboard Atom D2550 processor 1.86GHz NM10 Chipset 2 x SO-DIMM slot, up to 4GB DDR3 System Memory LCD/Touch Panel LCD Size 15.6" LED LCD 18.5" LED LCD Brightness 220 nits / 250 nits Maximal Resolution 1366 x 768 Ture flate resistive touch / True flate projected capacitive touch Touch Screen Type...
  • Page 22 Environment EMC & Safety FCC Class A, CE, LVD Operating Temperature 0°C ~ 35°C (32°F ~ 95°F) Storage Temperature -20° ~ 60°C (-4°F ~ 140°F) Operating Humidity 20% - 85% RH non-condensing Storage Humidity 20% - 85% RH non-condensing Dust & Water Proof IP 65 (front panel) Dimensions 396 x 245 x 48 mm...
  • Page 23 Model Name FPC8752 Mainboard Atom D2550 processor 1.86GHz Chipset NM10 System Memory 1 x DDR3 SO-DIMM socket up to 4G, FSB 1066MHz Graphic Memory GMA 3650 (Gfx frequency up to 640MHz), DX9 LCD/Touch Panel LCD Size 10.1" LED LCD Brightness 200 nits Maximal Resolution 1024 x 600...
  • Page 24 Environment EMC & Safety FCC /CE Class A/ LVD / EN 60601-1-2/ UL Operating Temperature 0°C ~ 35°C ( 32°F ~ 95°F ) Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Operating Humidity 20% ~ 85% RH non condensing Storage Humidity 20% ~ 85% RH non condensing Dust &...

  • Page 25: Jumper Setting

    Jumper Setting 6-1. C48 Motherboard 6-1-1. Motherboard Layout PWR1 MINI_PCIE JP12 JP12 CN24 CN23 RJ45_2 JP10 JP10 JP19 JP19 CN22 RJ11_1 CN21 CN15 CN20 CN17 CN18 CN19 SKT1 JP14 CN16 JP14 CN14 CN13 CN27 CN31 SATA2 JP18 JP20 JP20 JP18 RJ45_1 CN11 CN26...

  • Page 27: Connectors & Functions

    6-1-2. Connectors & Functions Connector Function Power Button Connector Printer Port Reset Printer Port CN5/8 HDD Power CN11 COM5 For Touch CN13 Card Reader Connector CN14 Line out CN15 HDD LED CN16 Speaker & MIC CN18 MIC IN CN20/JP10 System Indicator CN22 USB Port CN23...
  • Page 28 6-1-3. Jumper & BIOS/Utility Setting COM2 RS232/485/422 Setting Function 1 3 5 7 9 1 3 5 7 9 11 ▲RS232 2 4 6 8 10 2 4 6 8 10 12 1 3 5 7 9 1 3 5 7 9 11 RS485 2 4 6 8 10 2 4 6 8 10 12...
  • Page 29 4. To switch on the power, select "Power". Please save the change before exiting BIOS so as to go for physical jumper adjustment. COM3/COM4 Jumper setup Function JP18 1 3 5 7 ▲+5V 2 4 6 8 COM3 1 3 5 7 +12V 2 4 6 8 1 3 5 7...
  • Page 30 Cash Drawer Power Setting Function JP19 +19V ▲+12V Power Mode Setting Function ▲ATX Power AT Power System Indicator Function JP10 1 3 5 7 ▲Disable 2 4 6 8 1 3 5 7 Enable 2 4 6 8 Inverter Selection Function JP14 1 3 5...
  • Page 31 CMOS Operation Mode CMOS Reset To clear the CMOS, 1. Remove the power cable from the system. 2. Open the system, and set the ‘CMOS Operation jumper’ from ‘CMOS Normal’ to ‘CMOS Reset’. (refer to the jumper shown below) 3. Connect the power cable to the system, and power on the system: in ATX mode: press the power button and it will fail power on in AT mode: turn on system power 4.
  • Page 32 LCD ID Setting Several configurations are applied to different sizes of panel. Please refer to the followings to complete relevant settings. LVDS Resolution Output Interface Bits Channel 1 3 5 7 800 x 600 Single 2 4 6 8 1 3 5 7 1024 x 768 Single 2 4 6 8...

  • Page 33: Jumper Setting

    4. To switch on the power, select "+12V". Please save the change before exiting BIOS to avoid data lost. LCD Brightness Control Setting Please note Brightness Control can only be set by setting jumper JP14 for CCFL on the motherboard C48 V2.1. By default, the inverter is CCFL on the motherboard jumper setting.

  • Page 34: C56 Motherboard

    6-2. C56 Motherboard 6-2-1. Motherboard Layout CN11 RJ11_1 CN12 SATA2 USB1 SATA1 USB2 SATA4 RJ45_1 CN13 CN14 SKT1 RJ45_2 MINI_PCIE CN18 BAT1 CN15 CN10 VGA1 DDR3_A1 PWR1 CN16 PWR2 JP7 JP4 Version: C56 v0.9...

  • Page 35: Connectors & Functions

    6-2-2. Connectors & Functions Connector Function LVDS Inverter Connector System FAN Connector LVDS Connector Power LED Connector SATA LED Connector Speaker & MIC Connector SATA Power Connector COM5(Touch) Connector CN10 Printer Port Connector CN11/12 USB Port(Internal) CN13 LAN LED Connector CN14 PS2 Keyboard Connector CN15...

  • Page 36: Jumper Setting

    6-2-3. Jumper Setting Cash Drawer Power Setting Function ▲ +19V +12V Inverter Selection Function 1 3 5 ▲ CCFL 2 4 6 1 3 5 2 4 6 COM2/COM3/COM4 Power Setting COM2, COM3 and COM4 can be set to provide power to your serial device. The voltage can be set to +5V or +12V by setting jumper JP5 and JP6 on the motherboard.
  • Page 37 4. To enable the power, select COM2 , COM3 or COM4 Power setting and press <Enter>. Select Power and press <Enter>. Save the change by pressing F10. COM2 Power Setting Function ▲No Power COM2 +5V COM2 +12V COM3/COM4 Jumper setup Function 1 3 5 7 ▲+5V...
  • Page 38 LCD ID Setting LVDS Output Panel# Resolution Interface Bits Channel 1 3 5 7 9 LVDS 800 x 600 Single 2 4 6 8 10 Panel LVDS 1 3 5 7 9 800 x 600 Single Panel 2 4 6 8 10 LVDS 1 3 5 7 9 800 x 600...
  • Page 39 Intel Graphics Driver Setting 1. Right click Desktop. Find "Graphics Properties" and enter the manu. 2. Make sure the Display Device is same as follows. Intel Graphics Driver Output Interface Connector & Jumper Device Name LCD Panel CN26 Notebook VGA Port JP3/6 Monitor...

  • Page 40: Ideacom Touch Driver Installation

    6-3. IdeaCom Touch Driver Installation If your system is installing with the POS touch driver, please follow the below steps to remove the driver first. 1. Click <Start> 2. Click <All Programs> in the Start Menu 3. Click <TouchUtility> 4. Click <Unistall TouchUtility>...
  • Page 41 5. Click <Next> 6. Click <Finish> to exit. 7. Click <OK> to reboot your system to complete the uninstallation of POS touch driver.
  • Page 42 Please follow the below steps to install the IdeaCom touch driver. Driver Location Folder/File Fille Description <CD>:\Common\IdeaCom_Touch\ IdeaCom Touchdriver installation Windows\Release OS Supported: Windows XP Pro, POS Ready 2009,Windows Vista ,Windows 7(32bit only) 1. Click <Windows> of the IdeaCom Touch section in the driver list menu.
  • Page 43 4. Click <Next> to proceed the installation. 5. Click <Finish> to restart your system.

  • Page 44: Gesture Setup Example For Winxp

    6-3-1. Gesture Setup example for WinXP 1. Open <IdeaCom Touch Screen Manager> utility. (You can click IdeaCom Logo or select <Start Programs IdeaCom Touch Screen IdeaCom Touch Screen Manager> open the utility) 2-1. Open <Windows Picture and Fax Viewer> and check <Next Image> hot key 2-2.
  • Page 45 3-1. Check <Previous Image> hot key 3-2. Select <Hot Keys>, then set <Left Arrow> hot key 4-1. Check <Zoom In> hot key 4-2. Select <Hot Keys>, then set <Up Arrow> hot key...
  • Page 46 5-1. Check <Zoom Out> hot key 5-2. Select <Hot Keys>, then set <Down Arrow> hot key 6-1. Check <Rotate Clockwise> hot 6-2. Select <Hot Keys>, then set <Rotate Clockwise> hot key...
  • Page 47 7-1. Check <Rotate Counterclockwise> hot key 7-2. a. Select <Hot Keys>, then set <Rotate Counterclockwise> hot b. Click <Save> 8. Key in <Profile Name> to save, then click <OK> 9. Select <Apply> and clicck. Finally click <Yes> to save the setting...

  • Page 48: 6-3.2. Gesture Setup Example For Win7

    6-3.2. Gesture Setup example for Win7 1. Open <IdeaCom Touch Screen Manager> utility. (You can click IdeaCom Logo or select <Start All Programs IdeaCom Touch Screen IdeaCom Touch Screen Manager> open the utility ) 2-1. Open <Windows Photo Viewer and check <Next > hot key 2-2.
  • Page 49 3-1. Check <Previous> hot key 3-2. Select <Hot Keys>, then set <Left Arrow> hot key 4-1. Check <Rotate Clockwise> hot key 4-2. Select <Hot Keys>, then set <Rotate Clockwise> hot key...
  • Page 50 5-1. Check <Rotate Counterclockwise> hot key 5-2. Select <Hot Keys>, then set <Rotate Counterclockwise> hot 6. Select <Default Defined Action>, then set <Up Arrow> action for zoom in 7. Select <Default Defined Action>, then set <Down Arrow> action for zoom out. Click<Save>.
  • Page 51 8. Key in <Profile Name> to save, then click <OK> 9. Select <Apply> and clicck. Finally click <Yes> to save the setting...

  • Page 52: Appendix: Drivers Installation

    Appendix: Drivers Installation The shipping package includes a Driver CD in which you can find every individual driver and utility that enables you to install the drivers on the system. Please insert the Driver CD into the drive and double click on the “index.htm” to select the models.

Table of Contents