HP XW8400 Manual page 36

3 Connecting System Components
If you are using only one panel, you can connect that panel directly to the workstation,
instead of using the switch.
Autodesk Control Surface
If you are using more than one panel, use network cables to connect each of the panels to the
3.
network switch.
4. If you are using the panel that includes the tablet, use a USB cable to connect the panel to a
USB port on the back of your workstation.
30
To USB extender
5V DC 4A Ethernet
+ -
HP xw8400 Workstation
To port 1 on USB Extender
Autodesk
Tablet