HP XW8400 Manual page 17

Press F10 to accept the changes.
3.
Select Apply Defaults and Exit.
4.
This restores the original factory system defaults.
Verifying and Updating the Graphics Card Driver
A new graphic driver (NVIDIA® driver 165.46) is required for Lustre 2009 Windows systems.
To upgrade the NVIDIA graphics card driver, complete the following instructions.
To upgrade the NVIDIA graphics driver:
1. Copy the driver upgrade package located in the Lustre 2009 release package
(Drivers\Nvidia\165.46.zip) to a temporary location on your system.
2. Use a compression utility, like Winzip, to decompress the driver upgrade package and
extract it to a folder on your system.
3. Open the folder that contains the upgrade package you extracted and double-click setup.exe
to start the driver update.
4. Click Next to continue the upgrade procedure.
A Hardware Installation warning message appears.
Click Continue Anyway.
5.
6. Select Yes, I want to restart my computer now, and click Finish.
After you reboot, the NVIDIA graphics card driver is installed.
Ensuring Proper Environmental Conditions
You should consider the following environmental guidelines for all hardware configuration:
•
Make sure the rack in which hardware components are installed is open or ventilated. Follow
the ventilation specifications that apply to your system.
•
Place all components in an air-conditioned environment. All hardware components generate
heat and must be kept cool. See
•
Keep all hardware components in a clean, dust-free location.
•
Minimize vibration and humidity.
•
Do not block the vents on the component housing.
•
Do not drape anything, such as a jacket or a blanket, over hardware components.
•
Minimize electromagnetic noise by separating digital data and power cables from analog
audio cables and running them in different cable ducts.
"Power and Air Conditioning Requirements"
Hardware Configuration Guidelines
on page 12.
11