Continuous; Immediate - HP E1368A/69A/70A User Manual

:CONTinuous?

Example

[:IMMediate]

Comments
Example
56 HP E1368A/69A/70A Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
INITiate:CONTinuous? queries the scanning state. With continuous
scanning enabled, the command returns
disabled, the command returns
Query Continuous Scanning State
This example enables continuous scanning of a switchbox and queries the
state. Since continuous scanning is enabled, query should return 1.
INIT:CONT ON
INIT:CONT?
INITiate[:IMMediate] starts the scanning process and closes the first
channel in the channel list. Successive triggers from the source specified by
the TRIGger:SOURce command advances the scan through the channel list.
Starting the Scanning Cycle: The
starts scanning by closing the first channel in the channel list. Each
trigger received advances the scan to the next channel in the channel
list. An invalid channel list definition generates an error (see the
command).
[ROUTe:]SCAN
Stopping Scanning Cycles: See the
Enabling a Single Scan
This example enables a single scan of channels 00 through 02 of a
single-module switchbox. The trigger source to advance the scan is
immediate (internal) triggering, set with (default)
IMMediate .
SCAN (@100:102)
INIT
1 . With continuous scanning
0 .
Enables continuous scanning.
Query continuous scanning state.
INITiate[:IMMediate]
ABORt command.
TRIGger:SOURce
Scan channels 00-02.
Begin scan, close channel 00 (use
immediate triggering).
command
Chapter 4