Using A Handset, Headset, And Speakerphone; Obtaining A Headset - Cisco 7970 Series Phone Manual

Using a Handset, Headset, and Speakerphone

You can use your phone with a handset, headset, or speakerphone.
If you want to...
Use the handset
Use a headset
Use the speakerphone
Switch to the speakerphone or a
headset (from the handset)
during a call
Switch to the handset (from the
speakerphone or headset)
during a call
Adjust the volume level for a
call

Obtaining a Headset

Your phone supports four- or six-wire headset jacks. For information about purchasing headsets, see
Headset Information, page
44
Then...
Lift it to go off-hook; replace it to go on-hook.
Press to toggle headset mode on and off. If you use
AutoAnswer, see
You can use the headset in conjunction with all of the controls on
your phone, including
Press to toggle speakerphone mode on or off.
Many of the actions you can take to dial a number or answer a call
will automatically trigger speakerphone mode, assuming that the
handset is in its cradle and
Press or
Lift the handset (without pushing any buttons).
Press
This action adjusts the volume for the handset, speakerphone, or
headset, depending on which device is in use.
Press Save to preserve the volume level for future calls.
14.
Using AutoAnswer, page 45
is not lit.
, then hang up the handset.
during a call or after invoking a dial tone.
for exceptions.
and .
OL-10776-01