Table of Contents
Advertisement
Location and Function of Parts and Controls
Front Panel
a 1 (standby) switch
Press to turn on the power in standby mode. Press again
to set the unit in standby mode.
Note
Wait at least 10 seconds between switch actions.
b LED indicator
Lights or blinks to indicate the unit status.
LED
Power
Off
OFF
Off
ON
Green
ON
Blinking green
ON
and amber
alternately
Amber
ON
Blinking amber
ON
Blinking amber
ON
twice
Blinking amber
ON
three times
c LCD luminance sensor
Monitors the LCD luminance.
d Ambient light sensor
Monitors the ambient light in the unit location.
12
Location and Function of Parts and Controls
Unit status
Power off
Normal (luminance stabilized)
Luminance stabilizer on
Calibrating
Standby
Advanced power save mode
Error detected. Turn off the unit
and consult your Sony dealer.
Error detected. Turn off the unit
and consult your Sony dealer.
Advertisement
Table of Contents
