Table of Contents
Advertisement
Important EMC notices for use in the medical environments
• The LMD-DM30C/DM20C needs special precautions
regarding EMC and needs to be installed and put into
service according to the EMC information provided in
this instructions for use.
• The portable and mobile RF communications
equipment such as cellular phones can affect the
LMD-DM30C/DM20C.
Warning
The use of accessories and cables other than those
specified, with the exception of replacement parts sold
by Sony Corporation, may result in increased emissions
or decreased immunity of the LMD-DM30C/DM20C.
The LMD-DM30C/DM20C is intended for use in the electromagnetic environment specified below.
The customer or the user of the LMD-DM30C/DM20C should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Warning
If the LMD-DM30C/DM20C should be used adjacent
to or stacked with other equipment, it should be
observed to verify normal operation in the
configuration in which it will be used.
4
Guidance and manufacturer's declaration-electromagnetic emissions
Compliance
Group 1
Class B
Class D
Complies
Electromagnetic environment-guidance
The LMD-DM30C/DM20C uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
The LMD-DM30C/DM20C is suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes.
Advertisement
Table of Contents
