Routing the Cables
The cables can be stowed along the tilt stand under the
cable cover.
1
Lift the hook at the top of the cable cover, then
remove the cable cover from the tilt stand.
Hook
Tilt stand
2
Cable cover
3
4
Secure the cables along the groove at the rear of the
tilt stand, and put the cable cover back in place.
Follow steps 3 and 4 to attach the cable cover.
Hook the cable cover with two hooks located at the
bottom of the tilt stand. (
1
Fit on the hook located on the top of the cable
cover, and attach the cable cover. (
Hook
Cable cover
Tilt stand
)
)
2
Hook
17
Routing the Cables