Running Q-Vet - HP AlphaServer GS80 Upgrade Manual

4.4.2

Running Q-VET

You must run Q-VET on each partition in the system to verify the
complete installation.
Compaq recommends that you review the Testing Notes section of the Release
Notes before running Q-VET.
Follow the instructions listed under your operating system to run Q-VET in
each partition. Choose the Long IVP script rather than the Short one.
Tru64 UNIX
Graphical Interface
Command-Line
Interface
4-18 AlphaServer GS80 Upgrade Manual
1. From the Main Menu, select IVP, Load Script and
select Long IVP (the IVP tests will then load into the
Q-VET process window).
2. Click the Start All button to begin IVP testing.
> vet -nw
Q-Vet_setup> execute .Ivp.scp
Q-Vet_setup> start
Note that there is a "." in front of the script name, and that
commands are case sensitive.