Technical Specifications; Vii. Technical Specifications - Kenmore 630.13952 Manual

Technical Specifications

 Unsatisfactory washing results
o Incorrect amount of detergent.
o Utensils incorrectly arranged or rack overloaded.
o Spray arm rotation blocked by utensils.
o Spray arm nozzles need cleaning.
o Filters not properly fitted into position.
o Unsuitable cycle selected.
VII. Technical Specifications
 Dishwasher ratings – Dishwashers are rated 120VAC, 60 Hz, 15A, 1450W (max.).
Maximum amp draw when heaters running ~ 11A.
 Heater ratings – 120VAC, 1200W, flow-through, heats water ~ 2ºF / minute.
 Noise level – Dependent on model, from 44 db – 56 dB.
 Circulation pump ratings (BLDC motor) – 120VAC, 60 Hz, 100W (~ .13 HP), 3-phase.
 Drain pump ratings – 110 - 127 VAC, 60 Hz, 35W, .84A, 17Ω (9-vane)
 Water inlet pressure range – From 5 – 120 psi (.3 – 8.27 bar).
 Circulation pump flow rate – Approximately 60 liters/minute (~ 15.85 gallons/minute)
at a pressure of 420 mbar (6.1 psi).
 Drain pump flow rate – Approximately 10 liters/minute (~ 2.64 gallons/minute) at a
delivery height (head) of .9m (2.95').
 Water inlet valve flow rate – Approximately 2 liters/minute (~ .5 gallons/minute).
702_58300000149896_ara_en_b