Kenmore 630.13952 Manual page 29

Repair
To flip dishwasher upside-down
Tools needed: T20 Torx screwdriver, Phillips screwdriver and pliers.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Remove two tank screws from rear of dishwasher (10), disconnect both
702_58300000149896_ara_en_b
Turn off water and electricity.
brackets (1).
Remove toe kick by removing two Phillips screws and tilting toe kick
out from dishwasher (2).
Disconnect water line and electric supply (3).
Pull dishwasher out, place a pad or cardboard on the floor and carefully
flip the dishwasher upside-down (4).
Remove four base screws from front of dishwasher (5).
Remove two screws securing water valve to base. There's no need to
disconnect valve wire harness or inlet hoses (6).
Pull wire harness connector from rear of terminal box (7).
Push latch on base-mounted control to disconnect it from base (8).
Remove both door springs from base (9).
rubber circulation pump supports (11) and carefully lift up base from
dishwasher (12).
Disconnect dishwasher mounting