Installing Your Oven Accessories - Westinghouse POR663 User Manual

INSTALLING YOUR OvEN ACCESSORIES

1. Catalytic liners (on selected models)
Catalytic liners are coated with a specially formulated enamel
coating. This porous coating enables the "self cleaning"
process – see page 26 for more details. Catalytic liners
must be installed first but you can omit them, if you wish,
with no effect to cooking performance. Their sole purpose
is to make oven cleaning easier.
• T he catalytic liners will attach to each side of your
oven. There will be a left hand and right hand version.
This is marked on the panel.
• P osition the first liner as per the diagram. The black,
shiny side of the liner should be facing the oven wall,
the hooks pointing down and the word 'LH' positioned
to the top rear portion of the oven. The right hand side
will be a mirror image of this.
• L ine the hooks up with the slots provided in the oven
wall, push them in and then allow the liner to slide
down to its final position.
• T he access hole for the side racks should be visible
when the liner is correctly positioned – see diagram.
INSTALLATION
8
2. Side racks
• I nsert the twin pegged side into the rear access
holes provided, ensuring pegs are fully inserted.
• T hen locate the front peg into the front access hole
and push in firmly.
INSTALLING YOUR OvEN ACCESSORIES
• W hen locating the side racks into the small oven or grill
ensure the left pegs go into the upper two access holes.
3. Shelves and trays (excluding POR881)
The shelves are designed so that they have maximum travel
but cannot be accidentally pulled right out. The trays are
designed the same way and fit straight into the side racks.
• L ocate the rear edge of the shelf/tray in between
2 guide rails of the side rack – see diagram. ensure
the same rail positions on both sides of the oven are
being engaged.
• W ith the front edge raised, begin to slide the shelf
into the oven.
• o nce the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
• W hen fully inserted the shelf/tray should not interfere
with the closed oven door.
• T o insert the grill tray in a separate grill underbench
product, fully open the drawer and position the tray
so that the slots on the outer edges fit over the tabs
on the slides.
• R emove extra trays and dishes before roasting or baking.
Shelves and trays (POR881 only)
Your oven comes with formed "easy clean" runners.
The shelves are designed to travel freely on runners without
being pulled out accidentally. Make sure you have the shelf
in the correct orientation before you slide it in. Otherwise it
could become jammed.
• Locate the rear edge of the shelf in the recess between
2 formed runner.
Note: The Top 'Ledge' is not a shelf position
• With the front edge raised, begin to slide the shelf into
the oven. Lower the front edge as you push the shelf
completely in.
• The grill/baking tray for underbench oven models sits
into a wire carrier that fits into the oven exactly like
the shelves.
• The grill/baking tray for separate grill wall oven models
slides into the wire runners in a similar manner.
• When fully inserted, the shelf/tray should not interfere
with the closed oven door.
9
INSTALLATION