Overview
Entering Ship's ID
22
This chapter provides the information necessary for setting up the
following:
1) Ship's ID number
2) DSC block
3) VHF block
4) Channel system
5) Protection (Lock initial settings)
Procedure
1. Rotate the VOLUME knob clockwise to turn on the equipment.
"TEST" blinks.
TEST VHF CH70
auto
Figure 11 Test screen
2. Press the SELECT key. The Setup menu appears.
Setup menu < M.position >
1
2 3 4 6 9
Figure 12 Setup menu
3. Press the 9 key to display the system menu.
System < ROM version >
V
P ID DSC RT CH PO
Figure 13 System menu
4. Press the right arrow key to select ID.
5. Press the ENT key.
5. Initial Settings
ALM