Connections; Connection Of Power Supply; Convention Vessels, 100/220 Vac Ship’s Mains; Fm-8500, Rear View - Furuno FM-8500 Installation Manual

Overview
CH70 ANT
Connect DSC
antenna here.
24VDC
Connects power
cable.
NMEA
Connects navigator
(Loran C, GPS).

Connection of Power Supply

14
Figure 5 shows where to connect various equipment at the rear of the
transceiver unit.
REMOTE
Covered with dummy
plate on standard
equipment.
CH70
RX ANT
24VDC
DMC
Connects Distress
Message Controller
DMC-5.
Figure 5 FM-8500, rear view
Convention vessels, 100/220 VAC ship's mains
Convention vessels must supply both AC and DC power to the FM-
8500, via an AC/DC power supply unit. Both AC and DC are sup-
plied by the AC/DC power supply unit, and when AC input fails DC
power is activated.
Connect the radio battery to the DC IN terminal on the PR-300. Con-
nect the AC ship's mains to the AC IN terminal on the PR-300.

4. Connections

EXT SP
Connects external
loudspeaker.
REMOTE ANT
EXT SP
NMEA PRINTER WING HANDSET
DMC
PRINTER
Connects Printer
Interface IF-8500.
ANT
Connects
antenna.
HANDSET
HANDSET MIC
Connects handset
mic.
WING HANDSET
Connects wing
handset.