Table of Contents
Advertisement
To Activate Auxiliary Output #2:
Press & Hold for 3 Seconds the "Auxiliary #2 Output" Button ( II )
IF ARMED, THE SYSTEM
WILL DISARM, WITH
3 SIREN CHIRPS
AND 1 LIGHT
Hold 3
FLASH
seconds
Hold 3
seconds
To Activate Auxiliary Output #3:
Press & Hold for 3 Seconds the "Auxiliary Output #3" Button ( III )
CAN OPERATE OPTIONAL
WINDOW ROLL-UPS
Hold 3
seconds
Auxiliary Output Notes:
• Auxiliary #2 output may be activated anytime, provided the vehicle's igni-
tion is off. While the ignition is on, the Auxiliary #2 output can be operated
as long as a vehicle door is open; this prevents the output from being acciden-
tally activated while driving.
• If feature #6 is programmed to have the Auxiliary #2 output disarm the sys-
tem, the doors will unlock when it is activated; and there is an audible and
visual confirmation: 3 siren chirps and one light flash if the system also dis-
arms, and one chirp and light flash otherwise.
• Auxiliary #3 output may be activated at any time, regardless of the ignition
being on or off, and regardless of the security system's status.
• Auxiliary #3 has no audible and/or visual confirmation.
IF THE SYSTEM IS NOT ARMED,
CONFIRMATION IS 1 SIREN CHIRP
AND 1 LIGHT FLASH
TYPICALLY USED
FOR OPTIONAL
THE DOORS WILL UNLOCK*
EXAMPLES:
CAN OPERATE OTHER
OPTIONAL EQUIPMENT,
ON OR OFF THE
VEHICLE
* An optional doorlock
interface must be
installed. When
Auxiliary #2 is operated,
all of the doors will
unlock, even if the
vehicle is configured
with Driver's Door
Page 16
Status Light flashing ten times, pausing, then repeating. Within 10 seconds, press
and release the transmitter/transceiver's "Arm/Lock" button to turn on "Unlock
#2 When Ignition Turned Off" (the siren will chirp once) or the "Disarm/Unlock"
button to turn this feature off (the siren will chirp twice).
Feature #11
TRUNK
RELEASE
This feature cancels the automatic locking or unlocking of the vehicle's doors
when the ignition switch is turned on or off if one of the doors is open.
This feature can be useful, for example, for leaving others within a locked vehicle
when only the driver exits the vehicle. Features #8, #9, or #10 must be turned on
for this feature to operate.
Programming Open Door Bypass Of Ignition Locking:
Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and
released eleven times. The system's response will be eleven siren chirps, and the
Status Light flashing eleven times, pausing, then repeating. Within 10 seconds,
press and release the transmitter/transceiver's "Arm/Lock" button to turn on
"Open Door Bypass Of Ignition Locking" (the siren will chirp once) or the
"Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
Feature #12
This feature adds the automatic locking of the doors to feature #4, Last Door
Arming. If this feature is turned on, the doors will lock when the system becomes
armed 30 seconds after closing the last door. Feature #4 must be turned on for
this feature to operate.
Programming Doors Lock With Last Door Arming:
Priority.
Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and
released twelve times. The system's response will be twelve siren chirps, and the
Status Light flashing twelve times, pausing, then repeating. Within 10 seconds,
press and release the transmitter/transceiver's "Arm/Lock" button to turn on the
Doors Lock With Last Door Arming feature (the siren will chirp once) or the
"Disarm/Unlock" button to turn off the feature (the siren will chirp twice).
Feature #13
This feature adds the automatic locking of the doors to feature #5, Automatic
Rearming. If this feature is turned on, the doors will lock when the system rearms
itself 90 seconds after being disarmed by the transmitter. Feature #5 must be
turned on for this feature to operate.
Open Door Bypass Of Ignition Locking
(Factory Default Setting On)
Doors Lock With Last Door Arming
(Factory Default Setting Off)
Doors Lock With Automatic Rearm
(Factory Default Setting Off)
Page 33
Advertisement
Table of Contents
