1. Manuals
  2. Brands
  3. Omega Manuals
  4. Car Alarm
  5. Crime Guard 850i3
  6. Operation manual

Omega Crime Guard 850i3 Operation Manual

Keyless entry and security
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION MANUAL
3
850i
COPYRIGHT 1999: OMEGA RESEARCH & DEVELOPMENT, INC.

Advertisement

Table of Contents
loading

Related Manuals for Omega Crime Guard 850i3

Summary of Contents for Omega Crime Guard 850i3

  • Page 1 OPERATION MANUAL 850i COPYRIGHT 1999: OMEGA RESEARCH & DEVELOPMENT, INC.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS About Your New Crime Guard System ......... 3 Using Your Crime Guard System ........... 4 Remote Arming By Transmitter ..........4-5 Arming Bypass Last Door Arming By Exiting The Car ........5-6 System Armed and Activated ..........7 Disarming The System ............

  • Page 3: About Your New Crime Guard System

    ABOUT YOUR NEW CRIME GUARD SYSTEM Congratulations on your purchase of a new Crime Guard security and remote starting system. Crime Guard systems combine the benefits of easy- to-use convenience with “no nonsense” protection of person and property. Please review this guide to become familiar with your Crime Guard vehicle security and remote starting system.

  • Page 4: Using Your Crime Guard System

    USING YOUR CRIME GUARD SYSTEM Your new Crime Guard security system is designed to deter theft of both your vehicle and its contents. Arming the system turns on the protection operation, disables the vehicle’s starter and locks the doors provided an interface is installed.

  • Page 5: Arming Bypass

    Upon Arming: • The siren will chirp twice (or four times if a zone is bypassed) unless the silent arming procedure is followed. • The parking lights will flash twice (or four times if a zone is bypassed). • The doors will lock.* •...
  • Page 6 The Last Door Arming feature may be coupled, if desired, with the auto- matic locking of the vehicle’s doors when the system arms itself.* The Last Door Arming process: 1- When the vehicle’s ignition has been turned off, the system waits until a door is opened.

  • Page 7: System Armed And Activated

    SYSTEM ARMED & ACTIVATED While the system is in the Armed state: • The Status Indicator Light will be flashing slowly Red to confirm that the system is armed, and also serve as a visual deterrent. • The starter interrupt circuit is engaged. •...

  • Page 8: Safety Disarm

    REMOTE DISARMING BY TRANSMITTER To Disarm the System: Press & Release the “Disarm/Unlock” Button ( THE PARKING AND THE SIREN WILL CHIRP DOME LIGHTS WILL ONCE TO CONFIRM ILLUMINATE DISARMING TO CONFIRM DISARMING THE DOORS WILL UNLOCK* With Driver’s Door Priority, again Press & Release the “Disarm/Unlock” Button ( ) to unlock the remaining doors To Silently Disarm the System:...

  • Page 9: Activation Alert

    Safety Disarm will also cancel Automatic Rearming (if it is programmed to operate). This feature is also very useful when the vehicle is exposed to environmental conditions, such as storms, trains or heavy vehicles, which may cause false activations. Safety Disarm is a temporary “one time” operation which occurs only while the system is activated.

  • Page 10: Driver's Door Priority Unlocking

    Automatic Rearming Notes - Turning the vehicle’s ignition on cancels Automatic Rearming. - Opening a door will suspend the 90 second countdown. - All protected zones must remain non-violated during the 90 second Automatic Rearming period. For example, if a vehicle door is opened during the 90 second period, the countdown will stop.

  • Page 11: Disarming By Emergency Override

    Notes There is no time limitation for the second pressing of the “Disarm/Un- lock” button. Once the button is pressed and released to Disarm the system, every subsequent pressing of the “Disarm/Unlock” button will produce the “unlock all doors” output, the single siren chirp and parking and dome light illumination period.

  • Page 12: Remote Panic

    ENHANCED REMOTE PANIC To Activate “Enhanced Remote Panic”: Press & Hold for 3 Seconds the “Arm/Lock” Button ( OR the “Disarm/Unlock” Button ( THE SIREN SOUNDS THE PARKING LIGHTS WILL FLASH Hold 3 Hold 3 seconds seconds THE DOORS WILL LOCK LOCK OR UNLOCK* “Enhanced Panic”...

  • Page 13: Other Transmitter Operations

    OTHER TRANSMITTER OPERATIONS The previous sections have described the basic everyday operations of your Crime Guard system. The transmitter is also capable of operating several other optional functions which are explained in this section. Two auxiliary outputs are available for use (the primary output Arms and Disarms the system).

  • Page 14: Auxiliary Output #2 / Auxiliary Output #3 Glass Breakage And Dual-Zone Infrasonic Impact Sensor

    Auxiliary Output Notes - Auxiliary Output #2 may be activated anytime, provided the vehicle’s ignition is off. While the ignition is on, the Auxiliary Output #2 can be operated as long as a vehicle door is open; this prevents the output from being accidentally activated while driving.

  • Page 15: Remote Sensor Bypass

    REMOTE SENSOR BYPASS To Activate Remote Sensor Bypass: Press & Release the “Arm/Lock” Button ( ) to Arm, then Press & Release the “Auxiliary Output #2” Button ( II ) THE SIREN WILL CHIRP TWICE TO CONFIRM ARMING THE SIREN THEN CHIRPS ONCE THE PARKING LIGHTS TO CONFIRM SENSOR BYPASS WILL FLASH TWICE...
  • Page 16 To Activate Remote Starting: Press & Release the “Arm/Lock” Button ( ) and the “Disarm/Unlock” Button ( ) together THE PARKING LIGHTS THE ENGINE WILL ILLUMINATE* STARTS * FLASHING PARKING LIGHTS IS OPTIONAL The remote starting operation is as follows: 1) Press and release the transmitter’s “Arm/Lock”...
  • Page 17 Certain conditions will prevent the engine from remotely starting, or if remotely started already, will stop the running engine. These conditions are: 1) A pressed brake pedal. 2) The gear selector not being in the “park” or “neutral” position. 3) An open hood. An open door will not prevent the system from starting the engine;...

  • Page 18: Easy Valet & Starting Valet Modes

    EASY VALET & STARTING VALET MODES The Valet Switch is in the Status Indicator Light/Valet Switch Assembly. The installer has the option of utilizing an additional, separate Valet Switch should a hidden Valet Switch location be desired. Please ensure that you and others who use your vehicle are aware of the location of the Valet Switch.
  • Page 19 - To remind the user that the system is in Easy Valet mode, the siren will chirp once every time the vehicle’s ignition is turned off. To Enter Starting Valet Mode: With the system disarmed, and depressing the brake pedal, Press & Hold the Valet Switch for 2 seconds.

  • Page 20: Status Indicator Light

    STATUS INDICATOR LIGHT The Status Indicator Light visually confirms the status of the system and provides a high level of visual deterrence. Two colors are shown- Red for security operations, and Green for remote starting operations. Combinations of both colors are seen when the two operations are occurring together. The Status Indicator Light, which shares a housing assembly with the Valet Switch, is normally mounted in a location where it can be easily seen by the driver, as well as from outside the vehicle.
  • Page 21 9) 1 Red Flash / Pause = System was triggered by current sensing. 10) 2 Red Flashes / Pause = System was triggered by an open hood or trunk. 11) 3 Red Flashes / Pause = System was triggered by an open door. 12) 4 Red Flashes / Pause = System was triggered by the sensor.

  • Page 22: Vehicle Recovery

    VEHICLE RECOVERY Your system is equipped with three separately programmable Vehicle Recovery protection features, which also provide Anti-Carjacking protection. The Vehicle Recovery operation may be selectively activated by the ignition, by an open door, or by the transmitter. How It Works Once the Vehicle Recovery process has begun, the user has 53 seconds to cancel the process by pressing the Valet Switch once.

  • Page 23: Automatic Transmitter Verification

    A UTOMATIC T RANSMITTER V ERIFICATION The patented ATV technology, which is standard on all Crime Guard models, is the only defense against an inherent weakness found in any remote-controlled vehicle security system. In all such systems, allowance is made for multiple transmitters to operate the system. In a matter of seconds, anyone familiar with the programming procedure can easily code their own unauthorized transmitter into the system.

  • Page 24: Programming The 850I

    PROGRAMMING THE 850i The Crime Guard 850i is a sophisticated, yet flexible security and convenience system. Many of its operations may be configured as the user desires- “Programming Mode” allows you to configure 30 operational features to suit your wants and needs. Your vehicle ignition key and the Valet Switch are used to enter the Programming Mode, as described by the three steps listed below.
  • Page 25 A convenient feature programming checklist is on pages 46-47, which greatly simplifies the feature programming process. The professional installer may take advantage of the optional Omega FPM-1 Features Programming Module. The FPM-1 can be used to program all features in a matter of moments.

  • Page 26: The 850I 'S Programmable Features

    Feature #1 Current Sensing (Factory Default Setting Off) This feature will cause the system to Activate if the control module’s processor detects current flow within the vehicle’s electrical system. Current sensing can also be delayed from the standard 3 second Arming Delay to 210 seconds (3 1/2 minutes).
  • Page 27 Feature #3 30 or 60 Second Alarm Duration (Factory Default Setting 60 Seconds) This feature allows the option of a 30 or 60 second Alarm Duration, which is when the system has activated in Armed state, sounding the siren and flashing the parking lights. Changing the Alarm Duration: Follow Steps 1 to 4 on page 24;...
  • Page 28 seconds, press and release the transmitter’s "Arm/Lock" button to turn on Last Door Arming (the siren will chirp once) or the "Disarm/Unlock" button to turn off Last Door Arming (the siren will chirp twice). Feature #6 Automatic Rearming (Factory Default Setting Off) This feature prevents your system from being disarmed accidentally, configuring the system to automatically rearm itself 90 seconds after it has been Disarmed by the transmitter.
  • Page 29 Feature #8 Parking Light Illumination Upon Disarm (Factory Default Setting On) This feature configures the system to illuminate the vehicle’s parking and interior lights for 30 seconds when it is Disarmed. Otherwise, if this feature is turned off, the parking lights will flash once upon Disarming the system. Programming Parking Light Illumination Upon Disarm: Follow Steps 1 to 4 on page 24;...
  • Page 30 ignition switch is turned off. If Driver’s Door Priority is installed, this feature controls the driver’s door only, and the following feature will control the automatic unlocking of the other doors. Programming Unlock #1 When Ignition Is Turned Off: Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed and released ten times.
  • Page 31 Within 10 seconds, press and release the transmitter’s "Arm/Lock" button to turn on “Open Door Bypass Of Ignition Locking” (the siren will chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren will chirp twice). Feature #13 Doors Lock With Last Door Arming (Factory Default Setting Off) This feature adds the automatic locking of the doors to feature #5, Last...
  • Page 32 Feature #15 Door Lock/Unlock Pulse Duration (Factory Default Setting .8 Second) This feature offers the selection of a .8 second or a 3 second pulse duration of the system’s doorlock outputs. Certain vehicles have power doorlocking systems which are vacuum operated, and thus require a longer output pulse from the Crime Guard system.
  • Page 33 installer on this option, as the vehicle must be properly equipped to utilize this Feature. Turning this feature on changes the door lock output pulse to a 28 second duration. Programming Total Closure Lock Pulse: Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed and released seventeen times.

  • Page 34: Programming Transmitters

    chirps, and the Status Light flashing nineteen times, pausing, then repeating. Within 10 seconds, press and release the transmitter’s "Arm/Lock" button to turn on the Door Activated Vehicle Recovery feature (the siren will chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
  • Page 35 Feature #22 Steady Siren or Pulsed Horn Output (Factory Default Setting Steady Siren) This feature allows the choice using of the vehicle's horn for the audible output of the security system instead of the electronic siren. When pro- grammed for use with a vehicular horn, this output pulses for 10 seconds, then pauses for 5 seconds, repeating this cycle for the duration of the acti- vated alarm period.
  • Page 36 Omega part numbers #119-05R (woodgrain finish) and #119-05B (polished ebony finish), are available from your Crime Guard dealer or directly from Omega Research and Development. The pages 44-45 will show the system’s operation if configured to operate with these transmitters.
  • Page 37 Feature #26 Steady/Flashing Lights During Remote Start Steady (Factory Default Setting This Feature configures the system's operation of the vehicle’s parking lights when the engine is running after it has been remotely started. The factory default setting has the parking lights illuminating steady during the engine run time;...
  • Page 38 available, the processor reverts to fixed timed starter outputs. This Feature sets the duration of the starter output, which is also the same base timing for voltage sensing type of starter output operation. There are four different base starter output time durations. Programming Extended Starter Output Time: Follow Steps 1 to 4 on page 24;...
  • Page 39 "Arm/Lock" button to configure the system for Tachless operation (the siren will chirp once) or the "Disarm/Unlock" button to configure the system for Tach Wire operation (the siren will chirp twice). Feature #30 Remote Start Preactivation (Factory Default On) This feature, also described on page 17, requires that the user press the Valet Switch once before exiting the vehicle in order for the remote starting operation to be available for later use.

  • Page 40: Programming Transmitters

    PROGRAMMING TRANSMITTERS As explained at the beginning of this Operations Guide, your Crime Guard system is capable of being operated by as many as four transmitters. When adding or deleting transmitter codes to operate the security system, follow this process: 1) Turn "on"...

  • Page 41: 1-Button Arm/Disarm" Operation

    Aux Channel #2 Large Button Upper Small Button Lower Small Button Upper Small Button Large Button Lower Small Button Lower Small Button Large Button Upper Small Button Omega Research and Development, Inc. P. O. Box 508 Douglasville, Georgia 30133 Page 41...

  • Page 42: Replacement Transmitters

    Transmitters purchased from Omega are $35.00 each, which includes shipping and handling. To order transmitters from Omega direct, please use the form below, which can be cut from this manual or photocopied and legibly fill in the Please send a street address. Your transmitter(s) needed information.
  • Page 43 Optional 3 Button Transmitters- “Rosewood” part number: #119-05R “Ebony” part number: #119-05B The optional 3 Button transmitter is ideal for use with Standard 4 Button the “1 Button Operation” feature Transmitter- offered by your Crime Guard system. Please see pages 36 and part number: 44-45 for a detailed description #105-05B...

  • Page 44: 3-Button Transmitter Operation

    3-BUTTON TRANSMITTER OPERATION Programmable feature #24 changes the configuration of how the trans- mitter operates the system. In the factory default setting of “2 Button Operation”, a single transmitter button alternates Arming and Disarming the system with every press of the button. These are the basic operations if the system is configured for “1 button”...
  • Page 45 To Activate Auxiliary Output #3: Optional 3-Button Transmitter Press & Hold the Small Lower Button for 3 Seconds EXAMPLE: CAN OPERATE OPTIONAL WINDOW ROLL-UPS SECONDS To Activate Remote Starting: Optional 3-Button Transmitter Press & Release the Small Center Button and the Small Lower Button together THE PARKING LIGHTS THE ENGINE...

  • Page 46: Features Programming Checklist

    FEATURES PROGRAMMING CHECKLIST This checklist will assist you when programming features. Before attempting feature programming, please carefully read pages 24 and 25 for the entire features programming details and instructions to become familiar with the features and the programming procedure. A detailed explanation of each of the programmable features is found on pages 26 through 32.
  • Page 47 FEATURE DEFAULT Current Sensing OFF ("Disarm/Unlock") 3 or 210 Second Current Sensing Delay 3 Seconds (“Disarm/Unlock) 30 / 60 Second Activated Alarm Cycle 60 Seconds ("Arm/Lock") 3 / 45 Second Arming Delay 3 Second ("Disarm/Unlock") Last Door Arming OFF ("Disarm/Unlock") Automatic Rearming OFF ("Disarm/Unlock") Auxiliary Output #2 Also Disarms System...

  • Page 48: Limited Lifetime Warranty

    L I F E T I M E W A R R A N T Y Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the "Company"), are warranted to be free from defects in materials and workmanship under normal use. If a product sold...

Table of Contents