Chapter 2 Preparing To Install The Wave-594 And Wave-694; Safety Warnings And Cautions - Cisco Wide Area Virtualization Engine 594 and 694 Installation Manual

Preparing to Install the WAVE-594 and WAVE-694
This chapter contains important safety information that you should know before you work with the
WAVE-594 and WAVE-694. Use the guidelines in this chapter to ensure your own personal safety and
to help protect your appliance from potential damage.
This chapter contains the following sections:
•
•
•
•
•
Note Read the Regulatory Compliance and Safety Information for Cisco Wide Area Virtualization Engines
document and the Site Preparation and Safety Guide that came with your appliance before you begin the
installation.

Safety Warnings and Cautions

Before you install the WAVE-594 and WAVE-694, observe the following safety warnings and cautions:
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
The plug-socket combination must be accessible at all times, because it serves as the main
Warning
disconnecting device. Statement 1019
OL-24619-02
Safety Warnings and Cautions, page 2-1
Safety Guidelines, page 2-2
Understanding the Environmental Requirements, page 2-5
Understanding the Power Requirements, page 2-6
Understanding the Grounding Requirements, page 2-6
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
2
C H A P T E R
2-1