Preparing To Install The Wave-7541, Wave-7571, And Wave-8541; Safety Warnings And Cautions - Cisco 7541 Hardware Installation Manual

Preparing to Install the WAVE-7541,
WAVE-7571, and WAVE-8541
This chapter contains important safety information that you should know before you work with the
WAVE-7541, WAVE-7571, and WAVE-8541. Use the guidelines in this chapter to ensure your own
personal safety and to help protect your appliance from potential damage.
This chapter contains the following sections:
•
•
•
•
•
Note
Read the Regulatory Compliance and Safety Information for Cisco Wide Area Virtualization Engines
document and the Site Preparation and Safety Guide that came with your appliance before you begin the
installation.

Safety Warnings and Cautions

Before you install the WAVE-7541, WAVE-7571, and WAVE-8541, observe the following safety
warnings and cautions:
Read the installation instructions before connecting the system to the power source. Statement
Warning
1004
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning The plug-socket combination must be accessible at all times, because it serves as the main
disconnecting device. Statement 1019
Safety Warnings and Cautions
Safety Guidelines
Understanding the Environmental Requirements
Understanding the Power Requirements
Understanding the Grounding Requirements
Cisco Wide Area Virtualization Engine 7541, 7571, and 8541 Hardware Installation Guide
2
C H A P T E R
2-1