Ports And Led Indicators - Cisco Wide Area Virtualization Engine 594 and 694 Installation Manual

Chapter 5 WAVE Interface Modules

Ports and LED Indicators

Figure 5-5
designations, and LEDs.
Figure 5-5
Figure 5-6
The Interface Module has an LED that corresponds to each port.
Table 5-1
LED
1
2
Figure 5-7
Module.
OL-24619-02
shows the 4-port Copper Gigabit Ethernet Interface Module port numbers, interface
Figure 5-6
4-Port Copper Gigabit Ethernet Interface Module—Port Numbering and LEDs
4 PORT BYPASS
0
1
2
3
Status GE 0/1 GE 2/3
1 2
8-Port Copper Gigabit Ethernet Interface Module—Port Numbering and LEDs
8 Port GE
Copper Inline
0
1
2
3
GE 0/1 GE 2/3
Status
1 2
Copper Interface Module—Power and Status LEDs
Name
Interface Module
power LED
Bypass status
shows the Gigabit Ethernet ports and LEDs for the 4-port and 8-port Copper Interface
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
shows the same information for the 8-port adapter.
0
1
2
3
GE 4/5 GE 6/7
Status
2
Color State Description
Green On Interface Module is receiving power.
— Off Interface Module is not installed or a power
supply failure has occurred.
Green Normal Indicates the inline port pair is in interception
mode.
Amber Bypass Indicates the inline port pair is in bypass
mode.
— Off No activity exists.
Ports and LED Indicators
Table 5-1 describes the LEDs.
5-5