JVC DT-V9L5 Instructions Manual page 26

Caution
●
Do not rest your arm on the monitor or lean against the monitor.
●
Do not touch the LCD panel when installing the monitor.
You can select the attaching point according to your purpose—at the top or the bottom of the monitor.
Then you can attach the monitor to other devices by using the screw holes on the tripod base (1/4-20UNC or 3/8-16UNC).
CAUTION
●
Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.
●
Fix the tripod base with the provided screws. Other screws may cause faulty installation or damage to the monitor.
Fix the tripod base with screws.
1/4-20UNC
3/8-16UNC
screw for tripod base
(provided)
Attach the external battery pack for the DC power supply.
●
Use an IDX V-Mount E-HL9S (ENDURA-HL9S) external battery.
CAUTION
●
Do not use the external battery for DC 24 V power supply.
Attach the battery by moving the battery in the direction of the arrow.
26 26
Detach the carry handle before attaching the tripod base(1), then fix
the tripod base with screws(2).
tripod base
(provided)
Reverse the above to attach the carry handle.
●
Detach the battery by moving the battery in the direction of the
arrow by holding down the eject button.
battery eject button
carry handle
1
CAUTION
Be sure to install the monitor securely to prevent the monitor from
falling over, which may cause damage to the monitor or injury.
screw for tripod base
(provided)
3/8-16UNC
1/4-20UNC
tripod base
(provided)
2