Intel ESM-2740 User Manual page 52

ESM-2740/2743
3.5.2.4 Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the computer. If it
is set to Enable, BIOS will shorten or skip some check items during POST.
Item
Enabled Enable quick POST
Disabled Normal POST
3.5.2.5 First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected
in these items.
Item
Floppy
LS120
HDD-0
SCSI
CDROM
HDD-1
HDD-2
HDD-3
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
3.5.2.6 Swap Floppy Drive
This field is effective only in systems with two floppy drives. Selecting Enabled assigns
physical drive B to logical drive A, and physical drive A to logical drive B.
Item
Enabled Enable cache
Disabled Disable cache
3.5.2.7 Book Up Floppy Seek
Seeks disk drives during boot up. Disabling seeds boot up.
Item
Enabled Enable Floppy Seek
Disabled Disable Floppy Seek
3.5.2.8 Boot Up NumLock Status
Select power on state for NumLock.
Item
Enabled Enable NumLock
Disabled Disable NumLock
52 ESM-2740/2743 User's Manual
Floppy Device
LS120 Device
First Hard Disk Device
SCSI Device
CDROM Device
Secondary Hard Disk Device
Third Hard Disk Device
Fourth Hard Disk Device
ZIP-100 Device
USB Floppy Device
USB ZIP Device
USB CDROM Device
USB Hard Disk Device
Network Device
Disabled any boot device
Description
Description
Description
Description
Description