Advertisement
Available languages
Available languages
.
PLAN YOUR CUT:
o Do not cut freehand. Guide your
workpiece solidly against the
fence and table top. Make sure
there is no debris between the
workpiece and its supports.
o Use extra caution with large,
small or awkward workpieces.
o Use extra support (tables,
sawhorses, blocks)if your
workpiece is hard to hold down
to the table. Do not use another
person as additional support or
to help feed, support or pull the
workpiece.
o Do not cut more than one
workpiece at a time.
o Do not turn your chop saw
ON before clearing everything
except the workpiece and related
support devices off the table.
.
AVOID ACCIDENTAL
STARTING:
Make sure the switch is off before
plugging the abrasive chop saw
into a power source.
WHEN THE CHOP SAW IS RUNNING
[_,
CAUTION
}
DO NOT ALLOW FAMILIARITY
GAINED FROM FREQUENT USE
OF YOUR CHOP SAW TO CAUSE A
CARELESS MISTAKE. REMEMBER
THAT A CARELESS FRACTION OF A
SECOND IS ENOUGH TO CAUSE A
SEVERE INJURY.
1.
KEEP CHILDREN AWAY:
o Make sure all bystanders are
clear of the power tool before
and during use.
o Before using the power tool, test
the saw by turning it on and
letting it run for a few seconds.
If it makes an unfamiliar noise or
vibrates, stop immediately. Turn
the chop saw off and unplug.
Do not restart the tool until the
problem has been corrected.
2.
DO NOT FORCE THE TOOL:
o Only cut one piece per cutting
operation,
.
BEFORE FREEING JAMMED
MATERIAL:
o Release the trigger switch.
o Wait for all moving parts to stop.
o Unplug the chop saw.
.
BEFORE LEAVING THE CHOP
SAW:
o Release the trigger switch.
o Unplug the chop saw.
o Make the workshop childproof.
Lock the shop. Disconnect
master switches.
CAUTION
]
A 14 in. wheel is the maximum
wheel capacity of your chop saw.
Never use a wheel that is too thick
to allow outer flange to engage
with the fiats on the spindle.
Larger wheels will come in contact
with the wheel guards, while
thicker wheels will prevent the bolt
from securing the wheel on the
spindle. Either of these situations
could result in a serious accident
causing personal injury.
Do not attempt to cut wood or
masonry with this chop saw. Never
cut magnesium
or magnesium
alloy with this machine. Failure
to comply could result in serious
personal injury.
Advertisement
