Advertisement
Available languages
Available languages
I_ WARNING
i
Never connect
the plug to the power
source outlet until all installations
and adjustments
are completed
and
you have read and understood
the
safety and operational
instructions.
ON/OFF SWITCH (FIG. J)
The ON/OFF trigger switch (1) is
located on the handle position of the
cutting arm.
1. Turn the chop saw ON by
depressing the trigger switch (1).
2.
To turn off, release the trigger
switch (1).
NOTE: Make the ON/OFF switch
childproof. Insert a padlock or chain
with padlock through the hole (3)
in the trigger switch to lock the
switch, preventing children and other
unauthorized users from turning the
machine on.
LOCK-ON BUTTON (FIG. J)
1. To engage the lock-on feature,
depress the trigger switch (1), and
simultaneously
push in the lock-on
button (2) located on the side of the
handle. Release the switch and the
tool will run continuously.
2.
To disengage the lock-on feature,
depress the trigger switch and
release.
[_
WARNING]
o
If you have the lock-on feature
engaged during use and the
power is disconnected
to the
saw, disengage
the lock-on
feature immediately.
o
To avoid accidental
start-up
of your chop saw, always
make sure the trigger switch is
OFF and the lock-on feature is
disengaged
before connecting
to power source.
Failure to heed
this warning
could result in
serious personal injury.
Fig. J
3
2
CUTTING A WORKPIECE
(FIG. K)
l_,
WARNING
1
Failure to heed the safety rules
could result in serious
personal
injury:
o
To avoid serious personal injury,
always make sure the adjustable
fence is secured in position.
o
Never perform any cutting
operation freehand (without placing
workpiece in the vise).
Advertisement
