Advertisement
Available languages
Available languages
o DONOTSTACK morethanone
workpiece o nthemachine baseat
a time.
o NEVER PERFORM ANY
OPERATION F REE-HAND. Always
secure theworkpiece t o becutin
thevise.
o NEVER handholda workpiece.
Workpiece w illbecome veryhot
whilebeingcut.
o NEVER reachbehind, u nder or
within3 in.ofthewheel a ndits
cuttingpathwithyourhands and
fingers foranyreason.
o NEVER reach to pickupa
workpiece, a piece ofscrapor
anything elsethatis inor nearthe
cuttingpathofthewheel.
o MAKESURE THEWHEEL
ISSECURELY M OUNTED
as described i ntheoperating
instructions before connecting
thetooltoa powersupply. D onot
tighten wheel e xcessively, sincethis
cancausecracks.
o CHECK THEWHEEL FOR
FISSURES A NDCRACKS, andtest
fornormal o peration priorto use.
o ALWAYS EASE THEABRASIVE
WHEEL AGAINST THE
WORKPIECE w hen starting tocut.
Aharshimpact c anbreak thewheel.
o ONLY USEA CHOP SAWWHEEL
RATED FOR
3600 RPM OR
GREATER and manufactured in
compliance with ANSI B 7.1. Always
store wheels in a dry place with little
temperature variation.
o BEFORE CUTTING, press the
trigger switch and allow the wheel to
reach full speed.
o This chop saw has been
designed
for cutting
metals
using reinforced
abrasive chop
saw wheels only. Do not remove
the wheel, install a steel blade
and attempt to cut other types
of materials
such as wood,
masonry, etc. Attempting
to cut
these other types of materials
could cause an accident
resulting
in serious
personal
injury.
o Do not attempt to modify this
tool or create accessories
not
recommended
for use with this
tool. Any such alteration
or
modification
is misuse and could
result in a hazardous
condition
leading to serious
personal
injury.
Advertisement
