Advertisement
Available languages
Available languages
13.
WEAR
A FACE MASK
OR DUST MASK. Sawing
operation produces dust.
14.
SECURE WORK. Use
clamps or a vise to hold
work when practical. It
is safer than using your
hand and it frees both hands to
operate the tool.
15. DISCONNECT TOOLS FROM
POWER SOURCE before servicing,
and when changing accessories
such as blades, bits and cutters.
16. REDUCE THE RISK OF
UNINTENTIONAL
STARTING.
Make sure switch is in the OFF
position before plugging the tool in.
17. USE RECOMMENDED
ACCESSORIES.
Consult
this Operator's Manual for
recommended accessories. The use
of improper accessories may cause
risk of injury to yourself or others.
18. NEVER STAND ON THE TOOL,
Serious injury could occur if the
tool is tipped or if the cutting tool is
unintentionally contacted.
20.
21.
NEVER LEAVE THE TOOL
RUNNING UNATTENDED.
TURN
THE POWER "OFF". Do not walk
away from a running tool until the
blade comes to a complete stop
and the tool is unplugged from the
power source.
DO NOT OVERREACH.
Keep
proper footing and balance at all
times. Never reach your hand or
arm across the cutting path of the
blade.
22. NEVER reach your hand or arm
across the path of the cutting blade.
23. MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for best
and safest performance. Follow
instructions for lubricating and
changing accessories.
24. DO NOT use power tool in
presence of flammable liquids or
gases.
25.
19. CHECK FOR DAMAGED PARTS.
26.
Before further use of the tool, a
guard or other part that is damaged
should be carefully checked to
determine that it will operate
properly and perform its intended
function - check for alignment of
27.
moving parts, binding of moving
parts, breakage of parts, mounting
and any other conditions that may
affect its operation. A guard or
other part that is damaged should
be properly repaired or replaced.
DO NOT operate the tool if you are
under the influence of any drugs,
alcohol or medication that could
affect your ability to use the tool
properly.
WARNING: Dust generated from
certain materials can be hazardous
to your health. Always operate saw
in well-ventilated
area and provide
for proper dust removal.
WEAR HEARING
PROTECTION to reduce
the risk of induced hearing
loss.
Advertisement
