Remote Control Lock; Change Temp Reading; Inserting Batteries; Control Panel - Kenmore 407.83126 Use & Care Manual

REMOTE CONTROL BUTTONS Cont. (Rg. 9)
7. Auto-on Timer: When the air conditioner
is off_ it can be set to automatically turn
on in 30 minutesto 24 hoursat the previ-
ous setting. To set the Auto-on Timer;
while the unit is off_point the remote con-
trol toward the air conditioner and press
the TIMER button. Then pressthe + or -
buttons to adjust the timer setting in 30
minute increments (,5 hours). Once de-
sired settingis reached_ pressTIMER but-
ton again. An audio alert will sound, and
the TIMER ON indicator will stop flashing
to indicate the setting has been saved and
the timer has been activated. To cancel
the auto-on timer, press the TIMER button
again.
Auto-off Timer: When the air conditioner
is on, it can be set to automatically turn
off in 30 minutes to 24 hours. To set the
Auto-off Timer; while the unit is on, point
the remote toward the air conditioner and
pressthe TIMER button. Then press the +
or - buttons to adjust the timer setting in
30 minute increments (.5 hours). Once
desired setting is reached, press TIMER
button again. An audio alert will sound,
and the TIMER OFF indicator will stop
flashing to indicate the setting has been
saved and the timer has been activated.
To cancel the auto-off timer, pressthe
TIMER button again.
8. Pressthe LIGHT button to turn the air
conditioner control panel indicator lights
on and off.
REMOTE CONTROL LOCK
Pressthe + and - buttonssimultaneouslyto
lock the buttons on the remote control.
When Iockeds the remote control may not
be used to operate the unit. Pressthe + and
- buttons simultaneouslyonce more to unlock
the remote control,
CHANGE TEMP READING °C & °F
When the unit is powered off, press the
MODE and - buttons simultaneously to
change the temperature reading from °F to
°C. Press the MODE and - buttons simultane-
ously once more to change the temperature
reading from °C to °F.
INSERTINGBATTERIES - The included re-
mote control uses two AAA batteries.
1) Remove the back cover of the re-
mote control
2) Insert two AAA 1.5V batteries, mak-
ing sure they are in the correct posi-
tion.
3) Replace the cover.
DO NOT mix old and new batteries. DO
NOT mix together Alkaline, Standard
(Carbon-Zinc), or Rechargeable (Nickel-
Cadmium) batteries. Dispose of batteries
properly. DO NOT leave batteries in the y
remote if it will not be used for longer than
2 months.
13