Kenmore 407.83086 Use & Care Manual page 20

Problem
Unit emits odor dur-
ing operation
Compressor does not
immediately activate
when power button is
pressed ON
The unit deactivates
The unit does not cool
to satisfaction
Temp reading has
changed from °F to
°C
Temp reading has
changed from °C to
°F
Remote Control is
locked
ii
Control indicator
lights don't illuminate
when unit is running
Possible Causes Solutions
Q
• First use of unit, or after
storage of unit in dusty
a rea
................ l.
• Normal Operation
• Normal Operation
• Room temperature is high
when unit is first turned
ON
* The temperature reading
has been changed using
the remote control
ii ii i ii
* The temperature reading
has been changed using
the remote control
• The "-" and "+" buttons
were pressedsimultane-
ously
i•
The control indicator
lights have been turned
off: usingthe remote con-
trol
, ii . ,,.. ,...
Odor development can arise upon first
use and after a long period of non-use by
starting in unsuitable areas (e.g. dusty
areas}. Run the unit for 1/2 day. The smell
will dissipate after awhile. In the case of
intense odor development, air the room.
i•
After pressing POWER button ON the
compressor wilt not start for 3 minutes.
Conditioned air will start to blow once the
compressor starts, but it may take up to
another 5 minutes
Upon reaching the set temperature, the
unit switches off automatically. Check
temperature setting.
,, ,., ,,.., ,
Air conditioners operate more effectively
if a cooler room temperature is main-
tained. To adequately cool the air in a
very warm room requires much more time
and energy.
• Make sure the unit is powered OFF. Press
the "MODE" button and "-" button simul-
taneously to change back to °F
• Make sure the unit is powered OFF. Press
the "MODE" button and "-" button simul-
taneously to change back to °C
Press the "-" and "+" buttons simultane-
ously to unlock the remote control
i . illllrlrl ill
Press the "+" and "FAN" buttons simulta-
neously to illuminate the control indicator
lights
2O